Philips HTS5000W user manual Selecting the matching colour Setting the TV Display, System

Getting Started (continued)

E		Selecting the matching colour		Setting the TV Display
ngl		system		Set the aspect ratio of the DVD system
is	The colour system of the DVD system,			according to the TV you have connected.
h
	DVD and TV should match. Only then will			The format you select must be available
	it be possible to play a DVD on this			on the disc. If it is not, the setting for TV
	system. Before changing the TV system,			display will not affect the picture during
	determine the colour system of your TV.			playback.
	1 In disc mode, press SETUP.		1 In disc mode, press SETUP.
	2 Press 2 repeatedly to select { Video Setup		2 Press 2 repeatedly to select { Video Setup
	Page }.			Page }.
	3 Use 34keys to highlight { TV Type },		3 Use 34keys to highlight { TV Display },
	then press 2.			then press 2.

Video Setup Page

TV Type

TV Display

Progressive

Picture Setting

Component

Video Setup Page

PAL	TV Type
NTSC
	TV Display
Multi	Progressive
	Picture Setting
	Component

4:3 Pan Scan

4:3 Letter Box 16:9 Wide Screen

4Use 34 keys to highlight one of the options below:

{PAL }

Select this if the connected TV has the PAL colour system. It will change the video signal of an NTSC disc and output it to PAL format.

{NTSC }

Select this if the connected TV has the NTSC colour system. It will change the video signal of a PAL disc and output it to NTSC format.

{Multi }

Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

5Select a setting and press OK.

➜Follow the instructions shown on the TV to confirm the selection (if any).

➜If a blank/distorted TV screen appears, wait for 15 seconds for auto recovery.

4Use 34 keys to highlight one of the options below:

{4:3 Pan Scan }

Select this if you have a conventional TV and want

both sides of the picture to be trimmed or formatted to fit your TV screen.

{4:3 Letter Box }

Select this if you have a conventional TV. In this case, a

wide picture with black bands on the upper and lower portions of the TV screen will be displayed.

{16:9 Wide Screen }

Select this if you have a wide- screen TV.

5Select a setting and press OK.

TIPS: The underlined option is the factory default setting.

To return to the previous menu, press 1. To remove the menu, press SETUP.

22

001-051-hts5x-01-Eng50 22 17/05/05, 1:18 PM 3139 115 23842