NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
Table 9- Supported VT100, VT220 and Console ANSI Commands, Cont'd
| Command |
|
| ||
FUNCTION | VT100, VT220 | Console ANSI |
Request keyboard status report |
| CSI ? 26 n | Same | |
Respond with keyboard language |
| CSI ? 27; Ps n | Same | |
Ps | Keyboard Language | Ps | Keyboard Language |
|
1 | U. S. | 6 | Spanish |
|
2 | U. K. | 7 | Swedish |
|
3 | Danish | 8 | Norwegian |
|
4 | German | 9 | Italian |
|
5French
*1. More than one mode, but less than 17, may be set with one sequence. Enter multiple numeric parameters separated by semicolons (;). However you cannot combine sequences containing "?" with those that don't contain "?", nor can
you combine sequences ending with "h" with those ending with "l".
*2. To toggle monitor mode from the keyboard, press CTRL SHIFT 1 (use the 1 on the numeric keypad).
*3. In VT52 or VT100 modes, displays checkerboard character.
4.5.2 VT52 Command Guide
Table 10- VT52 Mode Escape Sequences
Command | VT52 |
Move cursor up one line | ESC A |
Move cursor down one line | ESC B |
Move cursor right one column | ESC C |
Move cursor left one column | ESC D |
Move cursor to home position | ESC H |
Move cursor up one line with scroll | ESC I |
Move cursor to line line, column col | ESC Y line col |
Select graphics character set | ESC F |
Select U.S. ASCII character set | ESC G |
Erase from cursor to end of display | ESC J |
Erase from cursor to end of line | ESC K |
Print cursor line | ESC V |
Print display | ESC ] |
Transparent print mode on | ESC W |
Transparent print mode off | ESC X |
Copy print mode on | ESC ^ |
Copy print mode off | ESC _ |
Keypad application mode on | ESC = |
Keypad application mode off | ESC > |
Enter VT100 mode | ESC < |
Identify terminal | ESC Z |
59