Network Technologies T15-RS16, 8 On-Screen Display OSD, Standard Controls, OSD Control Menu

Page 68

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

4.7 On-Screen Display (OSD)

4.7.1 Standard Controls

The RACKMUX LCD has 5 standard control buttons and a power LED. The 5 standard control buttons operate as follows:

The Power button turns the RACKMUX LCD and backlight ON and OFF as desired.

The Power LED located immediately below the Power button is a dual color

LED. It will illuminate with a green color when the RACKMUX is powered

Power

ON and working properly. It will illuminate with a red color if the RACKMUX

ON/OFF

is powered ON but there is no input signal detected. The LED will

Power LED

illuminate red only momentarily just before turning OFF.

 

 

The Menu button is used to bring up the OSD menu where the various

 

Menu

 

Up Arrow

settings of the LCD display can be adjusted. Once the OSD screen is

 

displayed, the Menu button is used to make selections within the menus.

 

 

See "OSD Control Menu " (below) for more on LCD display settings.

Down Arrow

Controls for the OSD Menus

The Up and Down Arrow buttons are used to navigate through the menus. Move the cursor up or down as desired to highlight an item for selection. Once an item is highlighted, pressing the Menu button will select it.

Select/

Auto Adjust

Figure 26- OSD Controls

The Select button is used to make selections within the OSD menus when

the OSD menu is ON. When the OSD menu is OFF, the Select button will act as an Auto Adjust button to keep the user from having to use the menus to adjust the quality of the image on the monitor.

4.7.2 OSD Control Menu

The OSD (On Screen Display) Menu enables the user to select the desired characteristics of the LCD display. To activate the OSD Menu, press the Menu button (above). To turn the Menu back OFF, either select "EXIT" from the main menu or just wait 10-60 seconds and it will automatically be cleared from the screen.

4.7.2.1 OSD Main Menu

Selection

Purpose

Brightness/Contrast

Increase/decrease panel brightness/contrast level

Color

R,G,B color temperature control

Position

Auto Adjust

 

Video Image horizontal and vertical position control

 

Clock setting

 

Phase control

Setup

Control OSD Image position on screen

 

Set time OSD will stay on screen before auto shutoff

 

Select the language of the OSD menu

Exit

Exit from the OSD control menu

Range 1-1001-100

1-100

--

10 to 60 seconds

Several languages (see page 40)

63

Image 68
Contents RACKMUX-T15-RS16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Introduction Console TerminalConsole Switch Materials Materials Not Supplied, but RequiredFeatures and Functions Installation Rack Mounting InstructionsConnect Devices, Hosts, and Power Terminal vs. Serimux Cable ConnectionsConnect the Serimux and Terminal to a Network Power Up The RackmuxEthernet cable RJ45 Male Connector Setup The Terminal Getting StartedSaving and Exiting Setup F2- Genrl Setup MenuF4- Comm Setup Menu Connect to the SerimuxStartup- Accessible host list Using the Serimux Console Switch Password, seeAdministrator Controls 1 Login as the administratorPort List Port list displays the status of all portsPort Settings Port settings menuSetting Description Value Port serial settings Data bitStop Bit ParityFlow control Command Inter-character delayXon or Xoff Characters DTR line behaviorDisplay serial settings for different port number Modem settingsCopy Port Serial Settings Port data buffer Port data bufferUser List User ListUser Settings User settings menuPort access Copy User SettingsAdvanced Settings Change administrator passwordFirmware Load new firmware Save current firmwareSerimux is waiting to save its firmware User Accessible host list screen User ControlsUser main menu User main menuLimited user accessible Port list Port List screenUser Terse mode Terse mode commands ¾ Connect to port¾ Accessible host list ¾ Port infoInitialize Serimux Console Switch to default settings Factory reset button¾ Verbose mode ¾ User LogoutSerimux Port Characteristics Description Acceptable Value Default ValueUsing the Terminal How To Setup The TerminalChanging The Terminal Operating Parameters F1- Disp Setup MenuF2- Genrl Setup Menu Printer F3- Keybd Setup MenuF4- Comm Setup Menu F5- Misc Setup Menu F7- FKeys SET-UP Definition Setup MenuF6-Tabs SET-UP Menu Printer RCV ON/OFFF9- Lan Setup Menu F8- Ansbk SET-UP MenuF10- Colr1 Set-up Menu Programmable KeysAttribute = Bold/Blink Color Association = OFF/ON Color Setup MenuF11- Colr2 Set-up Menu Color Palettes Palette Display Attribute Foreground Color Background ColorColor Palettes Contd Local Keyboard Commands Command Enhanced PCTerminal Command Guide Commands Supported in Ascii PersonalitiesSame WyseKey/fkey DEL Select bell volumeStop parity word Sequence DEL Key/fkey Sequence Sequence DELESC . cursor1 Message CRESC a mf attr AttrFcolor Bcolor mapCcc C ColLine col Sending data 910+/925 Term Editing ContdClearing Data 910+/925 Term Print Functions Character SetsSet Pp bb...bbVariable Values for Commands Field FkeyKey LdrawMap DefinitionMax Maximum Speed Screen Area *eScroll Scrolling Type Speedlps VolumeParity Ansi Command Guide 1 VT100, VT220 and Console Ansi Command GuideVT100, VT220 Console Ansi Character Set SelectionESC Ps final Label assignedFinal Final characterCharacter Attribute VT100, VT220 Console Ansi Character AttributePsn Editing FunctionsKc/hc ST String VT100, VT220 Console Ansi Auxiliary Keypad Modes Console Ansi modeUnshifted function key More Terminal Control Commands Terminal ResetsVT100, VT220 Console Ansi Transmission/Printer Control Terminal Status Reports2 VT52 Command Guide VT52 Mode Escape Sequences CommandRespond with keyboard language CSI ? 27 Ps n Keyboard LanguageUsing Printer Server via Ethernet Connection Basic SetupSetup for LPD Tftp Printing Setup for TftpLPD printing On-Screen Display OSD Standard ControlsOSD Control Menu OSD Main MenuPosition Menu Brightness/Contrast MenuColor Menu Setup Menu OSD Image can be moved to different points on the displayKeyboard Functions Keyboard LayoutNumber Pad Keys of the Number PadHardware Specifications Terminal Hardware Specifications SerimuxHardware Information Attribute ValueSerial Port Pinouts CPU-to-RACKMUX Ethernet Crossover CableSerial Port Cabling RJ45 Signal Cable AdaptersSerimux Ethernet Pinouts Pin Description3 4 Terminal Connector Pin AssignmentsSUB-D Female connector Dimensional Drawings Warranty Information Index

T15-RS16, 8 specifications

Network Technology 8, commonly referred to as T15-RS16, represents a significant advancement in the realm of telecommunication and data networking. This technology is designed to enhance the capabilities of network infrastructures, enabling higher data transfer rates, improved reliability, and greater scalability. As the demand for faster and more efficient data transfer continues to grow, T15-RS16 has emerged as a vital solution for various industries.

One of the main features of T15-RS16 is its ability to support high-speed data transmission. This technology integrates advanced modulation techniques and signal processing algorithms that allow for data rates reaching up to several gigabits per second. This enables organizations to handle large volumes of data seamlessly, which is crucial for activities such as cloud computing, big data analytics, and real-time streaming services.

Another key characteristic of T15-RS16 is its robust error correction capabilities. The technology employs sophisticated error detection and correction mechanisms, ensuring that data integrity is maintained even in adverse conditions. This is particularly important for applications where accuracy is paramount, such as financial transactions and medical data transmission.

T15-RS16 also boasts scalability, making it an attractive option for both small enterprises and large corporations. It can easily adapt to the growing needs of businesses by allowing for the addition of more devices without compromising on performance. This future-proof aspect is essential in today's rapidly evolving technological landscape, where businesses seek to invest in solutions that can grow with them.

In terms of compatibility, T15-RS16 is designed to work seamlessly with existing network infrastructures. This allows organizations to upgrade their systems without needing to overhaul their entire network, providing significant cost savings. Moreover, the technology supports various networking standards, ensuring that it can easily integrate with multiple devices and platforms.

Security is another critical aspect of T15-RS16. This technology incorporates advanced encryption protocols that safeguard data against unauthorized access and cyber threats. Organizations can rely on T15-RS16 to ensure the confidentiality and security of their sensitive information.

In conclusion, Network Technology 8, or T15-RS16, offers a powerful combination of high-speed transmission, robust error correction, scalability, compatibility, and security. As organizations continue to embrace digital transformation, the need for efficient and reliable network technologies such as T15-RS16 becomes increasingly vital to meet the demands of modern computing and connectivity.