Network Technologies 8, T15-RS16 operation manual Modem settings, Copy Port Serial Settings

Page 23

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

3.1.3.1.10Copy Port Serial Settings

–Press [+] to select the current port as source in a port settings copy-paste process (except port 0).

–Then, press [*] to paste the port settings.

–Press [Y] to paste the selected port settings to the current port, [A] to paste to all ports, [S] to specify the destination port, or press any other key to cancel.

3.1.3.1.11Display serial settings for different port number

Press [>] (greater than symbol) to display the next higher port serial settings, or press [<] (less than symbol) to display the previous port serial settings.

Press [Esc] or [Space] to return to the "Port settings" menu.

3.1.3.2 Modem settings

From the "Port settings" menu, press [6] to display the "Modem settings" menu.

Remote connections are possible if modems are used, usually by the users. The remote modem may call in to a local modem attached to a SERIMUX port. A minimum number of port modem settings can be adjusted in the SERIMUX to control the connection (try the default values first; refer to the manual(s) for the modems otherwise).

Figure 12- Modem settings menu

The administrator can initialize a modem attached to a SERIMUX port, or disconnect the modem. To control the modem connection from the "Modem settings" menu, the following functions are possible:

Function

Keystroke

Attach and initialize a modem

[1] - [A]

Disconnect a modem

[1] - [D]

Change the modem reset string

[2]

Change the initialization string

[3]

Change the hangup string

[4]

Enable hangup on "NO CARRIER"

[5]

Save the changes

[Enter]

Cancel the command

[Esc]

Reset to default values

[0]-[Y]

.

FYI: If an old modem is attached to a SERIMUX port, it may be necessary to enable the “Hang-up on “NO CARRIER” message” option, in order to hang-up and disconnect the attached modem when receiving this message. Press [5], then [Y] to enable or any other key to disable this option. Usually, this option should remain disabled.

–Press [+] to select the current port as source in a port modem settings copy-paste process (except port 0).

–Then, press [*] to paste the port settings.

–Press [Y] to paste the selected port settings to the current port, [A] to paste to all ports, [S] to specify the destination port, or press any other key to cancel.

18

Page 22 Page 24
Image 23
Page 22 Page 24
Contents RACKMUX-T15-RS16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Console Terminal IntroductionConsole Switch Materials Not Supplied, but Required MaterialsFeatures and Functions Rack Mounting Instructions InstallationTerminal vs. Serimux Cable Connections Connect Devices, Hosts, and PowerConnect the Serimux and Terminal to a Network Power Up The RackmuxEthernet cable RJ45 Male Connector Getting Started Setup The TerminalConnect to the Serimux Saving and Exiting SetupF2- Genrl Setup Menu F4- Comm Setup MenuStartup- Accessible host list Password, see Using the Serimux Console Switch1 Login as the administrator Administrator ControlsPort list displays the status of all ports Port ListPort settings menu Port SettingsSetting Description Value Parity Port serial settingsData bit Stop BitDTR line behavior Flow control CommandInter-character delay Xon or Xoff CharactersDisplay serial settings for different port number Modem settingsCopy Port Serial Settings Port data buffer Port data bufferUser List User ListUser settings menu User SettingsCopy User Settings Port accessChange administrator password Advanced SettingsLoad new firmware Save current firmware FirmwareSerimux is waiting to save its firmware User Controls User Accessible host list screenUser main menu User main menuPort List screen Limited user accessible Port list¾ Port info User Terse modeTerse mode commands ¾ Connect to port ¾ Accessible host list¾ User Logout Initialize Serimux Console Switch to default settingsFactory reset button ¾ Verbose modeDescription Acceptable Value Default Value Serimux Port CharacteristicsHow To Setup The Terminal Using the TerminalChanging The Terminal Operating Parameters F1- Disp Setup MenuF2- Genrl Setup Menu Printer F3- Keybd Setup MenuF4- Comm Setup Menu Printer RCV ON/OFF F5- Misc Setup MenuF7- FKeys SET-UP Definition Setup Menu F6-Tabs SET-UP MenuProgrammable Keys F9- Lan Setup MenuF8- Ansbk SET-UP Menu F10- Colr1 Set-up MenuAttribute = Bold/Blink Color Association = OFF/ON Color Setup MenuF11- Colr2 Set-up Menu Palette Display Attribute Foreground Color Background Color Color PalettesColor Palettes Contd Command Enhanced PC Local Keyboard CommandsWyse Terminal Command GuideCommands Supported in Ascii Personalities SameKey/fkey DEL Select bell volumeStop parity word Message CR Sequence DELKey/fkey Sequence Sequence DEL ESC . cursor1Bcolor map ESC a mf attrAttr FcolorCcc C ColLine col Sending data 910+/925 Term Editing ContdClearing Data Pp bb...bb 910+/925 Term Print FunctionsCharacter Sets SetVariable Values for Commands Ldraw FieldFkey KeyScreen Area *e MapDefinition Max Maximum SpeedScroll Scrolling Type Speedlps VolumeParity 1 VT100, VT220 and Console Ansi Command Guide Ansi Command GuideLabel assigned VT100, VT220 Console AnsiCharacter Set Selection ESC Ps finalVT100, VT220 Console Ansi Character Attribute FinalFinal character Character AttributeEditing Functions PsnKc/hc ST String VT100, VT220 Console Ansi Auxiliary Keypad Modes Console Ansi modeUnshifted function key Terminal Status Reports More Terminal Control CommandsTerminal Resets VT100, VT220 Console Ansi Transmission/Printer ControlKeyboard Language 2 VT52 Command GuideVT52 Mode Escape Sequences Command Respond with keyboard language CSI ? 27 Ps nBasic Setup Using Printer Server via Ethernet ConnectionSetup for LPD Tftp Printing Setup for TftpLPD printing OSD Main Menu On-Screen Display OSDStandard Controls OSD Control MenuPosition Menu Brightness/Contrast MenuColor Menu OSD Image can be moved to different points on the display Setup MenuKeyboard Layout Keyboard FunctionsKeys of the Number Pad Number PadAttribute Value Hardware Specifications TerminalHardware Specifications Serimux Hardware InformationSerial Port Pinouts CPU-to-RACKMUX Ethernet Crossover CableSerial Port Cabling Cable Adapters RJ45 SignalPin Description Serimux Ethernet Pinouts3 4 Terminal Connector Pin AssignmentsSUB-D Female connector Dimensional Drawings Index Warranty Information

T15-RS16, 8 specifications

Network Technology 8, commonly referred to as T15-RS16, represents a significant advancement in the realm of telecommunication and data networking. This technology is designed to enhance the capabilities of network infrastructures, enabling higher data transfer rates, improved reliability, and greater scalability. As the demand for faster and more efficient data transfer continues to grow, T15-RS16 has emerged as a vital solution for various industries.

One of the main features of T15-RS16 is its ability to support high-speed data transmission. This technology integrates advanced modulation techniques and signal processing algorithms that allow for data rates reaching up to several gigabits per second. This enables organizations to handle large volumes of data seamlessly, which is crucial for activities such as cloud computing, big data analytics, and real-time streaming services.

Another key characteristic of T15-RS16 is its robust error correction capabilities. The technology employs sophisticated error detection and correction mechanisms, ensuring that data integrity is maintained even in adverse conditions. This is particularly important for applications where accuracy is paramount, such as financial transactions and medical data transmission.

T15-RS16 also boasts scalability, making it an attractive option for both small enterprises and large corporations. It can easily adapt to the growing needs of businesses by allowing for the addition of more devices without compromising on performance. This future-proof aspect is essential in today's rapidly evolving technological landscape, where businesses seek to invest in solutions that can grow with them.

In terms of compatibility, T15-RS16 is designed to work seamlessly with existing network infrastructures. This allows organizations to upgrade their systems without needing to overhaul their entire network, providing significant cost savings. Moreover, the technology supports various networking standards, ensuring that it can easily integrate with multiple devices and platforms.

Security is another critical aspect of T15-RS16. This technology incorporates advanced encryption protocols that safeguard data against unauthorized access and cyber threats. Organizations can rely on T15-RS16 to ensure the confidentiality and security of their sensitive information.

In conclusion, Network Technology 8, or T15-RS16, offers a powerful combination of high-speed transmission, robust error correction, scalability, compatibility, and security. As organizations continue to embrace digital transformation, the need for efficient and reliable network technologies such as T15-RS16 becomes increasingly vital to meet the demands of modern computing and connectivity.
Top Page Image Contents