Sun Microsystems X6270 manual Adding a CPU Module, 4DIMM Socket Release and Alignment

FIGURE 2-4DIMM Socket Release and Alignment

Figure Legend DIMM Socket Release and Alignment

1DIMM connector slot

2DIMM connector key

3DIMM ejector lever

e.Verify that the DIMM ejector levers are upright, seated, and tight. Press on ejector levers to ensure that they are engaged properly.

4.Install the cover on the server.

See “Install Cover on Server” on page 11.

Adding a CPU Module

The Sun Blade X6270 Server Module is shipped with a preinstalled CPU configuration. If you ordered an alternative CPU assembly option, the optional CPU assembly is shipped separately.

The CPU assembly option contains a CPU chip and a heatsink with preapplied thermal grease. CPU assembly options should only be installed by a Sun qualified service technician.

Refer to the following procedure when adding a CPU to the Sun Blade X6270 Server Module.

Chapter 2 Install Server Module Optional Components 19