8.Click the screen to activate the Managed Systems List.
9.
A prompt appears.
10.At the prompt, log in as root, using the OS password that was assigned during Solaris installation.
11.Click the SUN STK RAID Controller.
All attached hard disk drives on Enclosure 0 and 1 appear.
Note – HDD0 (OS) should be Enclosure 0 Logical Volume 1.
12.To mirror the OS,
13.Choose the appropriate RAID option (in this example, RAID 1 for Mirror).
14.Choose a disk to mirror the OS with, from the physical disk list. Select the hard disk drive that best fits your needs.
15.After you select the drive, click Next, and then view the configuration summary.
16.Click Apply to start the mirroring process.
You can also click Schedule to perform the mirroring process at a later time.
17.Another confirmation screen appears. Confirm to start the mirroring process.
The OS begins to mirror. Mirroring can take several hours, depending on the amount of data and the drive size.
Chapter 5 Configuring the Preinstalled Solaris 10 Operating System | 65 |