Sun Microsystems X6270 manual Adding a Fabric Expansion Module, Install FEM

FIGURE 2-9Connecting REM Battery Cable

3.Install the cover on the server.

See “Install Cover on Server” on page 11.

Adding a Fabric Expansion Module

The Sun Blade X6270 Server Module is not shipped with the fabric expansion module (FEM) option installed. This option must be ordered and is shipped separately for customer installation.

Refer to the following procedure when adding a fabric expansion module (FEM) to the Sun Blade X6270 Server Module.

▼Install FEM

1.Remove the cover from the server.

See “Remove Cover From Server” on page 11.

2.Locate the FEM board connectors on the mother board then remove the protective shipping caps from the connectors.

For FEM location on motherboard, see “Sun Blade X6270 Server Module Option Locations” on page 8.

3.To install the FEM board, do the following:

26 Sun Blade X6270 Server Module Installation Guide • December 2009