Installing the Server Module Into the Chassis
Consult the following sections when installing a server module into a powered on chassis:
■“Before You Begin” on page 34
■“Install Server Module Into a
Before You Begin
Prior to installing the server module into a
■Ensure that the following chassis components are installed and
■Chassis monitoring module (CMM).
■Network express modules (NEMs)
■All required cabling to the chassis are attached.
■The system chassis is
For information about installing chassis components, attaching cables, and powering on the chassis, see the Sun Blade 6000 or 6048 Series Chassis documentation at:
http://docs.sun.com/app/docs/prod/blade.srvr#hic
■Review the required installation tasks for properly installing and setting up the Sun Blade X6270 Server Module in the Sun Blade 6000 or 6048 Series Chassis documentation.
For more information, see TABLE
■If applicable, install the following optional server module components prior to installing the server module into the system chassis:
■ FEM, REM, DIMMs, and CPU
For instructions, see Chapter 2.
■Use a grounded antistatic wrist strap or equivalent safety equipment to prevent electrostatic discharge (ESD) when you install the Sun Blade server module into the system chassis.