A. Connectors and Pin Assignments
DSL Ports and POTS Splitter Connectors
The 50-pin RJ21X Telco connector labeled DSL Ports 1–24 provides the 2-wire loop interface from each DSL port to the MDF for CO applications, or the in-building wiring for customer premises applications. (The Canadian designation for this connector is CA21A.) The 50-pin RJ21X (CA21A) Telco connector labeled POTS 1–24 (if installed) provides the 2-wire loop interface with the internal POTS splitters.
Table A-1lists the pin assignments for these interfaces. Note that Pins 25 and 50 are not used.
Table A-1. DSL Connector Pinouts
| Connector Pins |
DSL Port | (Ring, Tip) |
| |
1 | 1, 26 |
| |
2 | 2, 27 |
| |
3 | 3, 28 |
4 | 4, 29 |
| |
5 | 5, 30 |
| |
6 | 6, 31 |
| |
7 | 7, 32 |
| |
8 | 8, 33 |
| |
9 | 9, 34 |
| |
10 | 10, 35 |
| |
11 | 11, 36 |
| |
12 | 12, 37 |
| |
13 | 13, 38 |
| |
14 | 14, 39 |
| |
15 | 15, 40 |
| |
16 | 16, 41 |
| |
17 | 17, 42 |
| |
18 | 18, 43 |
| |
19 | 19, 44 |
| |
20 | 20, 45 |
| |
21 | 21, 46 |
| |
22 | 22, 47 |
| |
23 | 23, 48 |
| |
24 | 24, 49 |
A-2 | March 2005 | 2600-A2-GN20-40 |