About This Guide
Document Purpose and Intended Audience
This document is written for technicians who install the BitStorm® 2600 IP DSLAM.
Document Summary
Section | Description |
|
|
Chapter 1, Installation | Describes the physical installation of the BitStorm 2600 into |
| a rack. |
|
|
Chapter 2, Cabling | Describes how to install all cables for the BitStorm 2600. |
|
|
Chapter 3, LEDs | Explains the meaning and usage of the front panel LEDs. |
|
|
Chapter 4, Configuration | Describes the minimal configuration steps required to |
| prepare the BitStorm 2600 for remote access, using the |
| command line interface and web interface. |
|
|
Appendix A, Connectors | Provides pinouts for connectors on the BitStorm 2600. |
and Pin Assignments |
|
|
|
Appendix B, Equipment List | Provides part numbers for the BitStorm 2600 and related |
| products. |
|
|
Appendix C, Technical | Lists the technical characteristics of the BitStorm 2600. |
Specifications |
|
|
|
Index | Lists key terms, acronyms, concepts, and sections in |
| alphabetical order. |
|
|
A master glossary of terms and acronyms used in Paradyne documents is available on the World Wide Web at www.paradyne.com. Select Support → Technical Manuals → Technical Glossary.
March 2005 | iii |