Paradyne manual Table C-1. BitStorm 2600 Technical Specifications 2 Criteria

Page 54

C. Technical Specifications

Table C-1. BitStorm 2600 Technical Specifications (2 of 2)

Specifications

Criteria

 

 

Interfaces

„ DSL PORTS: 50-pin RJ21X Telco-type connector

 

„ POTS: 50-pin RJ21X Telco-type connector

 

„ CONSOLE: DB9 (EIA-232-E)

 

„ Port 1 and Port 2: 8-pin modular jack (10/100BaseT)

 

„ Port 3 copper interface: 8-pin modular jack (1000BaseT)

 

„ Port 3 fiber interface: SFP socket

 

„ T1/E1 MLPPP interface: eight RJ48C modular jacks

 

 

Operating

Ambient Temperature: 0° to 50° C (32° to 122° F)

Environment

Relative Humidity: 5% to 95% noncondensing

 

Storage Temperature: –40°to 85° C (–40°to 185° F)

 

Shock and vibration tolerance sufficient to withstand normal shipping

 

 

 

Physical

Height:

1.75(44.5 mm, or 1U as defined in EIA-310-C) without feet

Dimensions

Width:

17.2(437 mm) without mounting brackets

 

Depth: 16.0(406 mm) with cables

 

 

Power

90–265 VAC, 47–63 Hz

 

 

Power

Model 2611: 45 Watts Maximum

Consumption

Model 2614: 43 Watts maximum

 

 

Model 2621: 57 Watts Maximum

 

Model 2624: 55 Watts Maximum

 

Model 2631: 57 Watts Maximum

 

Model 2671: 46 Watts Maximum

 

Model 2674: 44 Watts Maximum

 

 

Weight

2611 without splitters: 15.1 lb (6.8 kg)

 

2611 with splitters: 17.0 lb (7.7 kg)

 

2614: 13.1 lb (5.9 kg)

 

2621 without splitters: 14.7 lb (6.7 kg)

 

2621 with splitters: 16.3 lb (7.4 kg)

 

2624: 12.2 lb (5.5 kg)

 

2631 without splitters: 14.7 lb (6.7 kg)

 

2631 with splitters: 16.3 lb (7.4 kg)

 

2671: 15.5 lb (7.0 kg)

 

2674: 13.1 lb (5.9 kg)

 

 

 

C-2

March 2005

2600-A2-GN20-40

Image 54
Contents IP Dslam Copyright 2005 Paradyne Corporation All rights reserved Software and Firmware License Agreement Important Safety Instructions United States EMI Notice Japan Contents Equipment List Technical Specifications Index ConfigurationConnectors and Pin Assignments LEDsAbout This Guide Document Purpose and Intended AudienceDocument Summary Related Product Documents Document Number Document TitleInstallation Overview„ Installation Site PreparationCables Required DSL PortsPackage Contents Unpacking the HardwareFlat-head screw for attaching 19 mounting brackets to Mounting Configurations Installing the Brackets for Rack MountingMounting Brackets Inch 483 mm Rack Mount Installing the BitStorm 2600 Into a Rack 03-17436 Installing the BitStorm 2600 on a Wall 17.85 in 453 mm Installing the BitStorm 2600 on a Shelf or Desktop Cabling Cabling OverviewDSL Ports GigE Uplink Port 10/100BaseT Uplink Port T1 or E1 Uplink Chaining BitStorm 2600s Management Port Connecting a Terminal or PC to the Console Port Console PortConnecting a Modem to the Console Port Alarm Interface Ground Connecting to Power LEDs LED LocationsLED Meanings LEDConfiguration Using the CLI CLI Commands FunctionConfigure Management Inband Address BitStorm 2600 Startup Procedure LoginStartup Procedure for Inband Management Startup Procedure for Out-of-Band ManagementUsing the Web Interface System / Users Configuration / Management / Snmp Connectors and Pin Assignments Figure A-1. BitStorm 2600 IP Front PanelDSL Ports and Pots Splitter Connectors Port 1 and Port 2 10/100BaseT Connectors Port 3 1000BaseT ConnectorPort 3 GigE SFP Connector Table A-4. Port 3 GigE Connector Signal PinE1 and T1 Uplink Connectors Console Port ConnectorAlarm Connector Table A-7. Alarm Connections Signal Direction ContactEquipment List DSLTable B-1. BitStorm 2600 Model List 2 Technical Specifications DSLTable C-1. BitStorm 2600 Technical Specifications 2 Criteria Index NumericsIN-2 IN-3 IN-4