Patton electronic 1082/I Connecting 10BASE-T Ethernet Port to PC DTE, 10Base-T DTE, RJ-45 Pin No

Page 18

The RJ-45 connector on the Model 1082’s twisted pair interface is polar- ity insensitive and is wired for a two-wire interface. The signal/pin rela- tionships are shown in Figure 7 below.

Figure 7. Model 1082/I twisted pair line interface

5.2 CONNECTING 10BASE-T ETHERNET PORT TO PC (DTE)

The 10Base-T interface is configured as DTE (Data Terminal Equip- ment). If the Model 1088 is to to connect to another DTE device such as a 10Base-T network interface card, construct a 10Base-T crossover cable and connect the wires as shown in Figure 8.

10Base-T Port

10Base-T DTE

RJ-45 Pin No.

RJ-45 Pin No.

1 (TD+)

1 (TD+)

2 (TD-)

2 (TD-)

3 (RD+)

3 (RD+)

6 (RD-)

6 (RD-)

Figure 8. Connecting 10Base-T Ethernet port to PC

5.3 CONNECTING 10BASE-T ETHERNET PORT TO HUB (DCE)

The 10Base-T interface is configured as DTE (Data Terminal Equip- ment), just like a 10Base-T network interface card in a PC. Therefore, it “expects” to connect to a 10Base-T Hub using a straight-through RJ-45 cable. Figure 9 shows how to construct a cable to connect the 10Base-T interface to a 10Base-T Hub.

10Base-T Port

10Base-T Hub

RJ-45 Pin No.

RJ-45 Pin No.

1 (TD+)

 

 

1 (TD+)

 

 

2 (TD-)

 

 

2 (TD-)

 

 

3 (RD+)

 

 

3 (RD+)

 

 

6 (RD-)

 

 

6 (RD-)

 

 

Figure 9. Connecting the 10Base-T interface to a 10Base-T Hub

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents User Manual Table of Contents Model 1082/I Factory Replacement Parts Accessories Warranty Information FCC InformationCE Notice Service Tel 301 Mailsupport@patton.comFeatures General Information1082 Snmp Management Solutions DescriptionHTTP/HTML Management PPP Operational Background ApplicationsEthernet LAN Page Configuration Configuring the Hardware DIP SwitchesConfiguring DIP Switch S1 S1 Summary Table Position Function Factory DefaultSwitch S1-5 Asynchronous/Sync Operation Switches S1-1 and S1-2 Data RateS1-3 Setting S1-4 S1-5 SettingSwitch S1-8 Response to RDL Request Switches S1-6 and S1-7 System Clock ModeS1-6 S1-7 Clock Mode Description S1-8 SettingConfiguring DIP switch S2 S2 Summary Table Position Function Factory DefaultS2-1 Activation Description Switch S2-2 Front Panel Switch Disable S2-2 SettingSwitches S2-3, S2-6, S2-7 and S2-8 Reserved Installation Connecting DSL Interface10Base-T DTE Connecting 10BASE-T Ethernet Port to PC DTEConnecting 10BASE-T Ethernet Port to HUB DCE RJ-45 Pin NoPower Connection Universal AC Power 100-240VACDC Power To Power Supply JackTo -48VDC VinSourcePOWER-UP OperationLED Status Monitors LED Test Modes Remote Digital Loopback RDL/V.52 BERPage Connectors DiagnosticsLED Status Indicators PowerWeight Temperature RangeDimensions AltitudeAppendix B Model # Description

1082/I specifications

The Patton Electronics 1082/I is a versatile and highly efficient device designed to meet the data communication needs of various industries. This robust product excels in providing reliable long-range T1/E1 connectivity, making it an ideal choice for businesses looking to ensure uninterrupted communication over extensive distances.

One of the main features of the Patton 1082/I is its ability to support both T1 and E1 interfaces. This dual functionality allows users to seamlessly integrate into legacy systems while maintaining compatibility with modern communication standards. The device is equipped with integrated line conditioning capabilities, which enhance the signal quality and optimize performance over long distances. This feature significantly reduces the likelihood of signal degradation, ensuring a stable and reliable connection.

Incorporating advanced technologies, the Patton 1082/I employs a unique DIP switch configuration that enables users to easily adjust settings for their specific network requirements. This user-friendly approach eliminates the need for extensive technical expertise, allowing for quick and straightforward installation. Additionally, the device features LED indicators that provide real-time feedback on operational status, making it easy for users to monitor performance and troubleshoot potential issues promptly.

Another noteworthy characteristic of the Patton 1082/I is its compact design, which is tailored for space-constrained installations. The device is housed in a durable metal chassis that ensures longevity and protects against environmental factors. This rugged build can withstand harsh operating conditions, making it suitable for deployment in various locations, including outdoor settings.

Furthermore, the Patton 1082/I supports a wide range of operating temperatures, enhancing its versatility across different climates. This reliability is crucial for businesses that require constant connectivity, particularly in sectors such as telecommunications, banking, and remote monitoring.

In summary, the Patton Electronics 1082/I is a sophisticated solution for businesses seeking high-performance data communication. With its support for T1/E1 interfaces, advanced line conditioning, user-friendly configuration options, and durable design, it stands out as a leading choice in the market. Whether for enhancing existing infrastructure or establishing new connections, the Patton 1082/I delivers the reliability and efficiency necessary for today’s demanding communication environments.
Top Page Image Contents