TP-Link TD-8816 manual ADSL2+ Modem Router User Guide

TD-8816

ADSL2+ Modem Router User Guide

Figure 4-15

Router Local IP: These are the IP settings of the LAN interface for the device. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.

∙IP Address: Enter the modem router’s local IP Address, then you can access to the Web-based Utility via the IP Address, the default value is 192.168.1.1.

∙IP Subnet Mask: Enter the modem router’s Subnet Mask, the default value is 255.255.255.0.

∙Dynamic Route: Select this option to specify the RIP (Routing Information protocol) version for LAN interface, including RIP1, RIP2-Band RIP2-M. RIP2-B and RIP2-M are both sent in RIP2 format, the difference is that RIP2-M using Multicast, while RIP2-B using Broadcast format.

∙Direction: Select this option to specify the RIP direction. None means disabling the RIP function. Both means the ADSL modem router will periodically send routing information and accept routing information, and then incorporate them into routing table. IN only

27