TP-Link TD-8816 manual UPnP, ADSL2+ Modem Router User Guide

TD-8816

ADSL2+ Modem Router User Guide

Figure 4-39

SNMP: Activate or deactivate the function.

Get Community: Select to set the password for the incoming Get requests from the management station.

Set Community: Select to set the password for incoming Set requests from the management station.

Trap Host: Enter the trap host here.

4.5.4 UPnP

Choose “Access Management→UPnP”, you can configure the UPnP in the screen (shown in Figure 4-40).

UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly and automatically when it is no longer in use. UPnP broadcasts are only allowed on the LAN.

Figure 4-40

UPnP: Activate or deactivate the UPnP function. Only when the function is activated can the UPnP take effect.

Auto-configured:If you activate the function, then the UPnP network devices can automatically configure network addressing, announce their presence in the network to other UPnP devices and enable exchange of simple product and service descriptions.

49