Polycom DOC2547A manual An RMX has two MPM cards installed, Both MPM cards are enabled

Page 29

Polycom RMX 2000 Hardware Guide

Table 4 Card Configuration Mode After Next Restart

Current

Media

Card(s)

Card(s)

Operating

Operating

Cards

Mode After

Supported

Disabled

Mode

Installed

Next Restart

 

 

 

 

 

 

 

 

MPM

 

 

 

 

or

All

None

MPM

 

MPM x 2

 

 

 

 

 

 

 

 

 

MPM

MPM

 

 

MPM

and

MPM+ Only

MPM+

Only

 

MPM+

 

 

 

 

 

 

 

 

 

 

 

 

MPM+

 

 

 

 

or

None

All

MPM+

 

MPM+ x 2

 

 

 

 

 

 

 

 

Example 1:

Current status

An RMX has two MPM cards installed.

The Card Configuration Mode is MPM.

Both MPM cards are enabled.

Action

1.Remove one MPM card.

2.Insert one MPM+ card.

Result

The Card Configuration Mode remains MPM.

The remaining MPM card remains enabled.

The inserted MPM+ card is disabled.

After Reset

The Card Configuration Mode is MPM+.

The inserted MPM+ card is enabled.

The remaining MPM card is disabled.

1-23

Image 29
Contents Polycom RMX 2000 System Hardware Guide USA United States Federal Communication Commission FCC Regulatory NoticesChinese Communication Certificate Singapore Certificate Table of Contents Table of Contents Hardware Description Main FeaturesRMX 2000 Specifications Following table summarizes the different system capacities System CapacitiesVideo Resolution Resources with MPM+ Site Requirements Safety RequirementsRack Mount Safety Precautions Installation Precautions RMX 2000 Front Panel RMX 2000 ComponentsCntl CPU Component DescriptionComponent Description RTM IP RMX 2000 Rear PanelManagement Network on page G-1 Following items appear on the RMX 2000 rear panelRTM Isdn Cables Connected to the RTM IP & Isdn Cards All external connectors are located on the rear panelRMX 2000 Front Panel LEDs RMX 2000 LEDsFollowing items appear on the RMX 2000 front panel ComponentCard Insertion Initiated If during Card removal Initiated The cardCntl Unit LED Color Description Name RMX 2000 Rear Panel LEDsFollowing LEDs appear on the RTM IP card ShMG LEDs Function Name Following LEDs appear on the RTM IsdnPort Type Maximum Possible MPM and MPM+ Configuration ModesCard Resources Bandwidth Type MPM+ Resource CapacitiesHD720p HD1080p @30fps @60fps MPM+ Up toMPM and MPM+ Modes Remove one MPM card Insert one MPM+ card An RMX has two MPM cards installedBoth MPM cards are enabled Remove the MPM+ card Insert one MPM card RMX 2000 General Information dialog box opens RMX Chassis TypesComponent Replacement Types of Ejector Levers on RMX Components Fully Open The card is released from the MCU housingHandle Replacing the Cntl ModulePolycom RMX 2000 Hardware Guide Replacing the Power Supply Module Replacing the Fan Drawer Removing the MPM/MPM+ Card from the MCU Replacing a Faulty MPM/MPM+ CardInstalling the Replacement MPM/MPM+ Card Installing a New MPM/MPM+ Card in a Powered On RMXReplacing a RTM Isdn Card PRI Cables Replacing the RTM IP Card