Polycom DOC2547A manual PRI Cables

Page 41

Polycom RMX 2000 Hardware Guide

6Slide in the replacement RTM ISDN card.

7Insert the card into the slot until the ejector levers touch the front edge of the card cage.

8Push the ejector levers to their fully closed position.

9Tighten the captive screws on each side of the rear panel of the card, securing the RTM ISDN card to RMX.

10Turn ON the RMX 2000.

11Connect the RJ-45 terminated PRI cables into any of the slots labeled PRI1 - PRI12:

LAN	PRI Cables
	Power

7 E1 or 9 T1 cables can be connected to each RTM ISDN card, up to a total of 14 E1 or 18 T1 PRI cables when two RTM ISDN cards are installed.

1-35

Image 41

Contents Polycom RMX 2000 System Hardware Guide USA United States Federal Communication Commission FCC Regulatory NoticesChinese Communication Certificate Singapore Certificate Table of Contents Table of Contents Hardware Description Main FeaturesRMX 2000 Specifications Following table summarizes the different system capacities System CapacitiesVideo Resolution Resources with MPM+ Site Requirements Safety RequirementsRack Mount Safety Precautions Installation Precautions RMX 2000 Front Panel RMX 2000 ComponentsCntl CPU Component DescriptionComponent Description RTM IP RMX 2000 Rear PanelManagement Network on page G-1 Following items appear on the RMX 2000 rear panelRTM Isdn Cables Connected to the RTM IP & Isdn Cards All external connectors are located on the rear panelRMX 2000 Front Panel LEDs RMX 2000 LEDsFollowing items appear on the RMX 2000 front panel ComponentCard Insertion Initiated If during Card removal Initiated The cardCntl Unit LED Color Description Name RMX 2000 Rear Panel LEDsFollowing LEDs appear on the RTM IP card ShMG LEDs Function Name Following LEDs appear on the RTM IsdnPort Type Maximum Possible MPM and MPM+ Configuration ModesCard Resources Bandwidth Type MPM+ Resource CapacitiesHD720p HD1080p @30fps @60fps MPM+ Up toMPM and MPM+ Modes Remove one MPM card Insert one MPM+ card An RMX has two MPM cards installedBoth MPM cards are enabled Remove the MPM+ card Insert one MPM card RMX 2000 General Information dialog box opens RMX Chassis TypesComponent Replacement Types of Ejector Levers on RMX Components Fully Open The card is released from the MCU housingHandle Replacing the Cntl ModulePolycom RMX 2000 Hardware Guide Replacing the Power Supply Module Replacing the Fan Drawer Removing the MPM/MPM+ Card from the MCU Replacing a Faulty MPM/MPM+ CardInstalling the Replacement MPM/MPM+ Card Installing a New MPM/MPM+ Card in a Powered On RMXReplacing a RTM Isdn Card PRI Cables Replacing the RTM IP Card