Polycom RMX 2000 Hardware Guide
5Carefully slide the MPM/MPM+ card out through the front panel.
Installing the Replacement MPM/MPM+ Card
1On the card to be installed, move the ejector levers to their fully open position.
2Slide in the replacement MPM/MPM+ card.
3Push the MPM/MPM+ card firmly into the Backplane, making sure it is properly seated in its slot.
4Ensure that the metal ejector levers are fully retracted into their housings.
5Tighten the captive screws on the front panel of the RMX that secure the MPM/MPM+ card to the chassis.
Installing a New MPM/MPM+ Card in a Powered On RMX 2000
1If applicable, loosen the captive screws and remove the slot cover.
2On the card to be installed, move the ejector levers to their full open position.
3Insert the card into the slot until the ejector levers touch the front edge of the card cage.
4Push the ejector levers to their closed position and tighten the captive screws on each side of the card, securing the MPM/MPM+ card to the RMX.