Trapeze Networks: Mobility System for MP 422 Access Points
Checking the configuration
Once the switch is configured, issue the following command at the command prompt to check the SVP settings:
sh ap
The following information should be displayed (repeat the command to see changes):
CoS | Queue |
| Tx |
|
=========================== |
| |||
| port: 1 | radio: 1 |
|
|
1,2 | Background | 0 |
| |
0,3 | BestEffort | 604 |
| |
4,5 | Video |
| 0 |
|
6,7 | Voice |
| 79106 | # Voice should have |
|
|
|
| the most traffic. |
| port: 1 | radio: 2 |
|
|
1,2 | Background | 0 |
| |
0,3 | BestEffort | 0 |
| |
4,5 | Video |
| 0 |
|
6,7 | Voice |
| 0 |
|
The switch and AP are now ready for use with SpectraLink Wireless
Telephones.
The network topology and other functions can also be configured using the Mobility System software. Please refer to the Trapeze Networks Mobility System Software Configuration Quick Start Guide or Trapeze Mobility Exchange Installation and Basic Configuration Guide for more information.
PN: | 11 |