Trapeze Networks: Mobility System for MP 422 Access Points
Introduction
Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and wireless LAN (WLAN) infrastructure products.
The products listed below have been thoroughly tested in Polycom’s lab and have passed VIEW Certification. This document details how to configure the Trapeze Networks Mobility Exchange (MX) switch and Mobility Point (MP) access point (AP) with SpectraLink Wireless Telephones.
Certified Product Summary
Manufacturer: | Trapeze Networks: www.trapezenetworks.com |
| |||||
|
|
|
|
|
|
|
|
Approved products: | WLAN switches |
|
| Access points |
| ||
|
|
| |||||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
|
| ||
Security : |
|
|
|
| |||
|
|
|
|
|
|
|
|
MX/MP software version certified: | Release 5.0.11.4 |
|
|
|
|
| |
SpectraLink handset models certified: ** | e340/h340/i640 |
|
| 8020/8030 |
|
| |
SpectraLink handset software certified: | 89.119 |
|
| 122.010 or greater |
| ||
|
|
|
|
|
|
|
|
SpectraLink radio mode: | 802.11b |
| 802.11b |
| 802.11g |
| 802.11a |
Maximum telephone calls per MP: | 10 |
| 10 |
| 12 * |
| 12 * |
Recommended network topology: | Switched Ethernet (required) |
|
|
|
| ||
|
|
|
|
|
|
|
|
†Denotes products directly used in VIEW Certification testing
*Maximum calls tested during VIEW Certification. The certified product may actually support a higher number of maximum calls for 802.11a and 802.11g radio modes.
**SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified with the WLAN hardware and software identified in the table. Throughout the remainder of this document they will be referred to collectively as “SpectraLink Wireless Telephones”.
PN: | 3 |