Polycom 1725-36060-001 manual Configuration Guide

Page 16

Configuration Guide

set spantree uplinkfast disable set spantree fwddelay 15 vlan 1 set spantree hello 2 vlan 1 set spantree maxage 20 vlan 1

set spantree priority 32768 vlan 1 set spantree disable vlan 1

set igmp disable vlan 1

set igmp proxy-report enable vlan 1 set igmp querier disable vlan 1 set igmp mrsol disable vlan 1

set igmp version 2 vlan 1 set igmp mrsol mrsi 30 vlan 1 set igmp qi 125 vlan 1

set igmp oqi 255 vlan 1 set igmp qri 100 vlan 1 set igmp lmqi 10 vlan 1 set igmp rv 2 vlan 1

set igmp mrouter port 3 disable set igmp receiver port 3 disable

#disable router and receivers on other ports as appropriate

set fdb agingtime 1 age 300

set interface 1 ip 10.30.1.1 255.0.0.0

set mobility-domain mode seed domain-name mobdom set mobility-domain member 10.30.1.2

set security acl ip SVP permit cos 7 119 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

set security acl ip SVP permit 0.0.0.0 255.255.255.255 set security acl map SVP vlan v1 out

commit security acl SVP set ntp disable

set ntp update-interval 64 set igmp disable vlan v1

16

PN: 1725-36060-001_D.doc

Image 16
Contents Trapeze Networks Trademark Information Introduction Certified Product SummaryService Information Network Topology Access Point Setup and Configuration Installing softwareService profile commands Ssid & security policy setup WPA2-PSKRadio profile commands Network topology and MP access point hardware configurationRadio configuration SVP configurationSubnet roaming configuration between multiple MX switches Following commands are performed on the seed MX switchChecking the configuration Configuration File For Reference Only Trapeze Networks Mobility System for MP 422 Access Points Set radio-profile RealRadio auto-tune power-backoff Trapeze Networks Mobility System for MP 422 Access Points Configuration Guide