Polycom 1725-36060-001 manual Configuration File For Reference Only

Configuration Guide

Configuration File (For Reference Only)

The following configuration file was used during VIEW Certification testing. The configuration below includes all configuration attributes, including defaults. Use the command show configuration all for this detailed version. To only see non-default configuration values, use the command show configuration.

Note: All of the lines below are commands, except for those preceded by the # symbol, which denotes a comment.

#General Configuration set ip dns domain trpz.com set ip dns enable

set log console enable severity error set log session disable severity info set log buffer enable severity error

set log trace enable severity debug mbytes 1 set web-aaa enable

set dot1x timeout supplicant 30 set dot1x timeout auth-server 30 set dot1x quiet-period 0

set dot1x reauth-max 2 set dot1x tx-period 5

set dot1x reauth-period 3600 set dot1x max-req 2

set dot1x key-tx enable set dot1x reauth enable set dot1x authcontrol enable set dot1x wep-key-period 1800 set dot1x wep-rekey enable set dot1x bonded-period 0 set prompt

set system ip-address x.x.x.x set system countrycode US set auto-config disable

#Security Profile

set service-profile VoWLAN-WPA ssid-name <SSID name> set service-profile VoWLAN-WPA shared-key-auth disable

set service-profile VoWLAN-WPA wep active-unicast-index 1

12 PN: 1725-36060-001_D.doc