Polycom 1725-36060-001 manual Network Topology

Page 5

Trapeze Networks: Mobility System for MP 422 Access Points

Network Topology

The following topology was tested during VIEW Certification. It is important to note that these do not necessarily represent all “Certified” configurations.

Both Layer-2 and Layer-3 roaming were tested. Layer-3 roaming of SpectraLink Wireless Telephones requires the use of a generic routing encapsulation (GRE) tunnel.

SpectraLink 8000

Telephony Gateway

SpectraLink 8000

SVP Server

SpectraLink

Wireless Telephones

PN: 1725-36060-001_D.doc

5

Image 5

Contents Trapeze Networks Trademark Information Certified Product Summary IntroductionService Information Network Topology Installing software Access Point Setup and ConfigurationWPA2-PSK Service profile commands Ssid & security policy setupNetwork topology and MP access point hardware configuration Radio profile commandsSVP configuration Radio configurationFollowing commands are performed on the seed MX switch Subnet roaming configuration between multiple MX switchesChecking the configuration Configuration File For Reference Only Trapeze Networks Mobility System for MP 422 Access Points Set radio-profile RealRadio auto-tune power-backoff Trapeze Networks Mobility System for MP 422 Access Points Configuration Guide