TP-Link TL-WA5110G manual UPnP

Page 48

4.9.4 UPnP

Figure 4-33 DMZ

To assign a computer or server to be a DMZ server:

1.Click the Enable radio button

2.Enter the IP address of a local PC that is set to be DMZ host in the DMZ Host IP Address field

3.Click the Save button.

)Note:

After you set the DMZ host, the firewall related to the host will not work.

4.9.4 UPnP

The Universal Plug and Play (UPnP) feature allows the devices, such as Internet computers, to access the local host resources or devices as needed. UPnP devices can be automatically discovered by the UPnP service application on the LAN. You can configure UPnP on this page that shown in Figure 4-34:

Figure 4-34 UPnP Settings

¾Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Disable button. As enabling UPnP may present a risk to security, this feature is disabled by default.

¾Current UPnP Settings List - This table displays the current UPnP information.

•App Description – The description provided by the application in the UPnP request

•External Port - External port, which the router opened for the application.

•Protocol - Shows which type of protocol is opened.

•Internal Port - Internal port, which the router opened for local host.

•IP Address - The IP address of the local host which initiates the UPnP request.

•Status - Either Enabled or Disabled, “Enabled” means that port is still active. Otherwise, the port is inactive.

Click Enable to enable UPnP.

40

Image 48

Contents TL-WA5110G 54M High Power Wireless Access Point 1910010154COPYRIGHT & TRADEMARKS All rights reservedFCC STATEMENT FCC RF Radiation Exposure StatementCE Mark Warning General authorization required for outdoor use and public serviceNational Restrictions 2400.0-2483.5 MHz CountryProduct Description 54 M High Power Wireless Access Point ETSI EN 300 328 V1.7.1ETSI EN 301 489-1 V1.8.12008 & ETSI EN 301 489-17 EN60950-12006 EN623112008CONTENTS Configuring the Device in AP Operation Mode 5.6.1 Package Contents 1.2 Features Chapter 1. Product Overview1.1 Overview of the Product 1.3 Conventions Chapter 2. Hardware Installation 2.1. The Front Panel2.2. The Rear Panel Indication2.5. Connecting the Device Ensure the AP is powered on before it restarts completely2.3. System Requirements 2.4. Environment Requirements3. Connect the AP to the desktop PC Chapter 3. Quick Installation Guide 3.1. Configure the DeviceFor Windows 98 OS or earlier, the PC and AP may need to be restarted 3.2. Quick Setup Please check the connection following these stepsFigure 3-4 Login Windows Figure 3-7 Choose WAN Connection Type The IP parameters should have been provided by your ISP Figure 3-9 Quick Setup - Static IPFigure 3-11 Quick Setup - Wireless settings 4.1 Login 4.2 StatusIP address and Subnet Mask 2. Wireless SSID, Channel, Mode, Wireless MAC address, and IP address 3. WAN1. LAN 4. Traffic Statistics4.3 Quick Setup 4.4 Operation Mode4.5 Network 4.5.1 LAN4.5.2 WAN Figure 4-5 WAN - Dynamic IP Figure 4-6 WAN - Static IP You should type the following parameters into the spaces providedFigure 4-7 WAN - PPPoE 4.5.3 MAC Clone 4.6 Wireless 4.6.1 Basic Settings1 Only the PC on your LAN can use the Clone MAC Address To feature 2 If you click Save, the router will prompt you to reboot4.6.2 Wireless Mode The device will reboot automatically after you click the Save buttonFigure 4-12 Wireless Mode Figure 4-13 AP List 4.6.3 Security Settings Figure 4-14 Wireless Mode settings in AP Router modeYou can select one of the following security options Figure 4-15 Wireless Security 2. Shared Key - Select 802.11 Shared Key authentication3. Open System - Select 802.11 Open System authentication ¾ WEP - Select 802.11 WEP security4.6.4 MAC Filtering Figure 4-16 Wireless MAC address Filtering ¾ Status - The status of this entry either Enabled or Disabled¾ Description - A simple description of the wireless station To set up an entry, follow these instructions6. Click the Save button to save this entry 4.6.5 Wireless Statistics 4.6.6 Distance SettingThis page will be refreshed automatically every 5 seconds 4.6.7 Antenna Alignment 4.6.8 Throughput Monitor4.7.1 DHCP Settings 4.7 DHCP4.7.2 DHCP Clients List 4.7.3 Address Reservation To Reserve IP addresses4.8 Wireless settings 4.9 Forwarding 4.9.1 Virtual ServersTo setup a virtual server entry, please take the following steps 4.9.2 Port Triggering 4.9.3 DMZ 4.9.4 UPnP 4.10Security 4.10.1 Firewall4.10.2 IP Address Filtering 4.10.3 Domain Filtering Click the Enabled All button to make all entries enabled Figure 4-39 Domain FilteringFigure 4-40 Add or Modify a Domain Filtering entry To add or modify a Domain Filtering entry, follow these instructions4.10.4 MAC Address Filtering 4.10.5 Advanced Security Figure 4-43 Advanced Security settings 4.11Static Routing To add static routing entries4.12Dynamic DNS 4.12.1 Dyndns.org DDNS4.12.2 Oray.net DDNS 4.12.3 Comexe.cn DDNS 4.13System Tools 4.13.1 Time1. Select Using Daylight Saving Time 2 The router will reboot after the Upgrading is finished4.13.2 Firmware 2 The time will be lost if the router is turned off4.13.3 Factory Defaults 4.13.4 Backup & Restore4.13.5 Ping Watch Dog 4.13.6 Speed Test 4.13.7 Reboot 4.13.8 Password 4.13.9 Syslog4.13.10 Remote Management 4.13.11 Statistics Statistics TableBytes ICMPTCP SYN Tx Click the Refresh button to refresh immediatelyChapter 5. Configuring the Device in AP Operation Mode 5.1 Login5.2 Status 5.3 Quick Setup 5.4 Operation Mode5.5 Network 5.6 Wireless 5.6.1 Basic Settings3） The device will reboot automatically after clicking Save 5.6.2 Wireless Mode Page If the available AP can’t support with WDS, you may select Client mode without WDS or Universal Repeater mode to associate with the AP Figure 5-8 Point to Point Bridge Page 5.6.3 Security Settings the wireless network with wireless antenna accessoriesFigure 5-11 Wireless Security 5.6.4 MAC Filtering Figure 5-12 Wireless MAC address Filtering Figure 5-13 Add or Modify Wireless MAC Address Filtering entry6. Click the Save button to save this entry 5.6.5 Wireless Statistics 5.6.6 Distance Setting5.6.7 Antenna Alignment 5.6.8 Throughput Monitor 5.7 DHCP5.7.1 DHCP Settings 5.7.2 DHCP Clients List5.7.3 Address Reservation 5.8 Wireless settings 5.9 System Tools 5.9.1 Firmware5.9.2 Factory Defaults 5.9.3 Backup & Restore5.9.4 Ping Watch Dog 5.9.5 Speed Test2. Wrong process will lead the device unmanaged Figure 5-29 Speed Test 5.9.6 Reboot 5.9.7 Password5.9.8 Syslog Click Save when finished Click Clear All to clear allFigure 5-32 System Log Click Clear ALL to clear all the logsAppendix A FAQ 3. I want to use Netmeeting, what do I need to do? 4. I want to build a Web Server on the LAN, what should I do? 5. The wireless stations cannot connect to the router Appendix B Configuring the PCs 1. Configure TCP/IP component¾ Setting IP address automatically Now you have two ways to configure the TCP/IP protocol below¾ Setting IP address manually Click OK to keep your settings Appendix C Specifications WirelessGeneral Physical and EnvironmentAppendix D Glossary