Figure
¾Use Default Setting: Keep the default setting if the AP is used for indoor environment. If you want to change the distance, please uncheck the Use Default Setting box.
¾Distance: Specify the distance value in kilometers, accurate to the first decimal place. If the distance is set too short or too long, it will result poor connection and throughput performance, it is best to set the value at 110% of the real distance. If the AP is being used in an indoor setting, please use the default setting.
Click Save to keep your settings.
5.6.7Antenna Alignment
This page shows how remote AP’s signal strength changes while changing the antenna’s direction.
Figure
•Remote AP RSSI - Remote AP's signal strength value.
•Signal percent - The ratio of RSSI to RSSI RANGE in percentage.
•RSSI RANGE - You can drag the slider bar to set or input the RSSI RANGE value. The slider bar allows the range of the meter to be either increased or reduced. If the range is reduced, the color change will be more sensitive to signal fluctuations. The slider bar actually changes an offset of the maximum indicator value scale.
)Note:
It only works after you have established connection to remote AP under client mode
75