TP-Link TL-WA5110G manual 4.10Security, Firewall

Click Disable to disable UPnP

Click Refresh to update the Current UPnP Settings List.

4.10Security

Figure 4-35 The Security menu

There are five submenus under the Security menu (shown in Figure 4-35):Firewall, IP Address Filtering, Domain Filtering, MAC Address Filtering and Advanced Security. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

4.10.1 Firewall

Using the Firewall page (shown in Figure 4-36),you can turn the general firewall switch on or off. The default setting for the switch is off. Turning the general firewall switch to off will disable IP Filtering, Domain Filtering and MAC Filtering even if their individual settings are enabled.

If the general firewall switch is off, even if IP Address Filtering, DNS Filtering and MAC Filtering are enabled, their settings are ineffective.

Figure 4-36 Firewall Settings

¾Enable Firewall - Enable or disable Firewall.

¾Enable IP Address Filtering - Enable or disable IP Address Filtering. There are two default filtering rules for IP Address Filtering: Allow or Deny the packets specified to pass through the router.

¾Enable Domain Filtering - Enable or disable Domain Filtering.

¾Enable MAC Filtering - Enable or disable MAC Address Filtering. There are two default

41