TP-Link manual TL-PA210 AV200 Nano Powerline Adapter

Contents TL-PA210 AV200 Nano Powerline Adapter REV3.0.1COPYRIGHT & TRADEMARKS FCC STATEMENT CE Mark WarningSafety Information EN60950-12006+A112009+A12010+A122011 Product Description AV200 Nano Powerline AdapterEN EN EN 61000-3-22006+A12009+A22009 EN EN Yang Hongliang Product Manager of International BusinessCONTENTS Chapter 5 Advanced Feature How to Use the Pair ButtonsPackage Contents TL-PA210 AV200 Nano Powerline Adapter1.1 Conventions 1.3 Important Safety InstructionsChapter 1 Introduction 1.2 System Requirement¾ If liquid has been spilled on the product 2.1 Introduction Chapter 2 Connecting Mechanism2.2 LED Indicator StatusInterface 2.3 Physical InterfaceTL-PA210 Description2.4 Connection Instruction 2.5 Hardware Connection - Computer2.6 Hardware Connection - Internet TL-PA210 AV200 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter Chapter 4 Using the Management Utility 4.1 Status4.2 Network 4.1.1 Set Local Device’s Network Name4.2.1 Rename the Remote Device/Enter Password Password is unnecessary to enter for renaming 4.2.2 Add Device4.3.1 Upgrade Firmware 4.3 System4.3.3 Set All Devices’ Network Name To upgrade the devices firmware, follow these instructions4.3.2 Reset Device Create a Powerline network using the Pair button： Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button 5.1 Pair Secure with 128 bits-AESThe sequence of Step 1 and Step 2 can be exchanged Join an existing Powerline AV NetworkLeave an existing Powerline AV Network 3. The Powerline LED does not light up Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 2. The Ethernet LED does not light up