TP-Link manual Package Contents, TL-PA210 AV200 Nano Powerline Adapter

Page 7

TL-PA210AV200 Nano Powerline Adapter

Package Contents

The AV200 Nano Powerline Adapter package contains the following items:

¾One AV200 Nano Powerline Adapter (There are two AV200 Nano Powerline Adapters in Starter Kit)

¾One RJ45 Ethernet Cable (There are two RJ45 Ethernet Cables in Starter Kit)

¾One Resource CD z This Guide

z Management Utility

)Note:

Make sure that the package contains the above items. If any of the above items are damaged or missing, please contact your dealer immediately.

1

Image 7

Contents REV3.0.1 TL-PA210 AV200 Nano Powerline AdapterCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTSafety Information Yang Hongliang Product Manager of International Business Product Description AV200 Nano Powerline AdapterEN EN EN 61000-3-22006+A12009+A22009 EN EN EN60950-12006+A112009+A12010+A122011Chapter 5 Advanced Feature How to Use the Pair Buttons CONTENTSTL-PA210 AV200 Nano Powerline Adapter Package Contents1.2 System Requirement 1.3 Important Safety InstructionsChapter 1 Introduction 1.1 Conventions¾ If liquid has been spilled on the product Status Chapter 2 Connecting Mechanism2.2 LED Indicator 2.1 IntroductionDescription 2.3 Physical InterfaceTL-PA210 Interface2.5 Hardware Connection - Computer 2.4 Connection Instruction2.6 Hardware Connection - Internet TL-PA210 AV200 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter 4.1 Status Chapter 4 Using the Management Utility4.1.1 Set Local Device’s Network Name 4.2 Network4.2.1 Rename the Remote Device/Enter Password 4.2.2 Add Device Password is unnecessary to enter for renaming4.3 System 4.3.1 Upgrade Firmware4.3.2 Reset Device To upgrade the devices firmware, follow these instructions4.3.3 Set All Devices’ Network Name 5.1 Pair Secure with 128 bits-AES Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button Create a Powerline network using the Pair button：Leave an existing Powerline AV Network Join an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged 2. The Ethernet LED does not light up Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 3. The Powerline LED does not light up