TP-Link TL-PA210 manual Appendix A Troubleshooting, The Ethernet LED does not light up

Page 27
Appendix A: Troubleshooting

TL-PA210AV200 Nano Powerline Adapter

Appendix A: Troubleshooting

The Troubleshooting provides answers to common problems regarding the Powerline Adapter.

1. The 1. The Power LED does not light up. Ans. Check the following: Power LED does not light up. Ans. Check the following:

1.Make sure that the Powerline Adapter is properly plugged into a power outlet.

2.Make sure the power outlet is active (working) by plugging another electric device into it.

3.Re-plug the Powerline Adapter to the power outlet. If the Power LED is still failed to light up, contact your local dealer for technical support.

2.The 2.The Ethernet LED does not light up. Ethernet LED does not light up.

Ans. Check the following:

1.Make sure that the Ethernet cable (RJ45) is properly connected to the Powerline Adapter’s Ethernet port.

2.Make sure that the other end of the Ethernet cable (RJ45) is properly connected to the computer LAN card or to you Cable/xDSL Ethernet port.

3.Make sure your computer LAN card is properly installed and configured.

4.Make sure your Cable/xDSL broadband access is working and configured correctly.

5.Contact your local dealer for technical support if the Ethernet LED is still failed to light up after the above procedures.

3.The 3.The Powerline LED does not light up. Powerline LED does not light up.

Ans. Check the following:

1.Double click to enable the Management Utility and click the “Rescan” button under the Network configuration homepage. The Management Utility will automatically detect all other Powerline Adapters on your powerline network.

2.Try to plug a second Powerline Adapter into a nearby power outlet and check whether the Powerline LED lights up or not.

3.Contact your local dealer for technical support if the Powerline LED is still failed to light up after the above procedures.

21

Page 26 Page 27
Image 27
Page 26 Page 27
Contents REV3.0.1 TL-PA210 AV200 Nano Powerline AdapterCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTSafety Information Yang Hongliang Product Manager of International Business Product Description AV200 Nano Powerline AdapterEN EN EN 61000-3-22006+A12009+A22009 EN EN EN60950-12006+A112009+A12010+A122011Chapter 5 Advanced Feature How to Use the Pair Buttons CONTENTSTL-PA210 AV200 Nano Powerline Adapter Package Contents1.2 System Requirement 1.3 Important Safety InstructionsChapter 1 Introduction 1.1 Conventions¾ If liquid has been spilled on the product Status Chapter 2 Connecting Mechanism2.2 LED Indicator 2.1 IntroductionDescription 2.3 Physical InterfaceTL-PA210 Interface2.5 Hardware Connection - Computer 2.4 Connection Instruction2.6 Hardware Connection - Internet TL-PA210 AV200 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter 4.1 Status Chapter 4 Using the Management Utility4.1.1 Set Local Device’s Network Name 4.2 Network4.2.1 Rename the Remote Device/Enter Password 4.2.2 Add Device Password is unnecessary to enter for renaming4.3 System 4.3.1 Upgrade FirmwareTo upgrade the devices firmware, follow these instructions 4.3.2 Reset Device4.3.3 Set All Devices’ Network Name 5.1 Pair Secure with 128 bits-AES Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button Create a Powerline network using the Pair button：Join an existing Powerline AV Network Leave an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged 2. The Ethernet LED does not light up Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 3. The Powerline LED does not light up
Top Page Image Contents