TP-Link manual Installing Management Utility, TL-PA210 AV200 Nano Powerline Adapter

Contents REV3.0.1 TL-PA210 AV200 Nano Powerline AdapterCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTSafety Information Yang Hongliang Product Manager of International Business Product Description AV200 Nano Powerline AdapterEN EN EN 61000-3-22006+A12009+A22009 EN EN EN60950-12006+A112009+A12010+A122011Chapter 5 Advanced Feature How to Use the Pair Buttons CONTENTSTL-PA210 AV200 Nano Powerline Adapter Package Contents1.2 System Requirement 1.3 Important Safety InstructionsChapter 1 Introduction 1.1 Conventions¾ If liquid has been spilled on the product Status Chapter 2 Connecting Mechanism2.2 LED Indicator 2.1 IntroductionDescription 2.3 Physical InterfaceTL-PA210 Interface2.5 Hardware Connection - Computer 2.4 Connection Instruction2.6 Hardware Connection - Internet TL-PA210 AV200 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter 4.1 Status Chapter 4 Using the Management Utility4.1.1 Set Local Device’s Network Name 4.2 Network4.2.1 Rename the Remote Device/Enter Password 4.2.2 Add Device Password is unnecessary to enter for renaming4.3 System 4.3.1 Upgrade FirmwareTo upgrade the devices firmware, follow these instructions 4.3.2 Reset Device4.3.3 Set All Devices’ Network Name 5.1 Pair Secure with 128 bits-AES Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button Create a Powerline network using the Pair button：Join an existing Powerline AV Network Leave an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged 2. The Ethernet LED does not light up Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 3. The Powerline LED does not light up