TP-Link manual System, Upgrade Firmware, TL-PA210 AV200 Nano Powerline Adapter

Page 23

4.3 System

TL-PA210AV200 Nano Powerline Adapter

4.3 System

The System tab window is for some basic settings of the adapter. On this tab window, you can upgrade the firmware to the latest version, reset the adapter’s settings to the factory defaults and configure all adapters’ network names.

4.3.1 Upgrade Firmware

Click the Upgrade Firmware button to upgrade the version of the firmware for the adapter and the following dialog will pop up.

¾NVM: None-volatile memory. It is used for upgrading the firmware.

17

Image 23

Contents REV3.0.1 TL-PA210 AV200 Nano Powerline AdapterCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTSafety Information Yang Hongliang Product Manager of International Business Product Description AV200 Nano Powerline AdapterEN EN EN 61000-3-22006+A12009+A22009 EN EN EN60950-12006+A112009+A12010+A122011Chapter 5 Advanced Feature How to Use the Pair Buttons CONTENTSTL-PA210 AV200 Nano Powerline Adapter Package Contents1.2 System Requirement 1.3 Important Safety InstructionsChapter 1 Introduction 1.1 Conventions¾ If liquid has been spilled on the product Status Chapter 2 Connecting Mechanism2.2 LED Indicator 2.1 IntroductionDescription 2.3 Physical InterfaceTL-PA210 Interface2.5 Hardware Connection - Computer 2.4 Connection Instruction2.6 Hardware Connection - Internet TL-PA210 AV200 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter TL-PA210 AV200 Nano Powerline Adapter 4.1 Status Chapter 4 Using the Management Utility4.1.1 Set Local Device’s Network Name 4.2 Network4.2.1 Rename the Remote Device/Enter Password 4.2.2 Add Device Password is unnecessary to enter for renaming4.3 System 4.3.1 Upgrade Firmware4.3.3 Set All Devices’ Network Name To upgrade the devices firmware, follow these instructions4.3.2 Reset Device 5.1 Pair Secure with 128 bits-AES Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button Create a Powerline network using the Pair button：The sequence of Step 1 and Step 2 can be exchanged Join an existing Powerline AV NetworkLeave an existing Powerline AV Network 2. The Ethernet LED does not light up Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 3. The Powerline LED does not light up