TP-Link TD-8816 manual UPnP, Ddns, ADSL2/2+ Ethernet Router User Guide

TD-8816

ADSL2/2+ Ethernet Router User Guide

Management Protocol (SNMP) is used for exchanging information between network devices.

Figure 4-31

¾Get Community: Select to set the password for the incoming Get and Get next requests from the management station.

¾Set Community: Select to set the password for incoming Set requests from the management station.

4.5.4 UPnP

Choose “Access Management→UPnP”, you can configure the UPnP in the screen (shown in Figure 4-32).

UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly and automatically when it is no longer in use. UPnP broadcasts are only allowed on the LAN.

Figure 4-32

¾UPnP: Activate or Deactivate the UPnP function. Only when the function is activated, can the UPnP take effect.

¾Auto-Configure:If you activate the function, then the UPnP network devices can automatically configure network addressing, announce their presence in the network to other UPnP devices and enable exchange of simple product and service descriptions.

4.5.5 DDNS

Choose “Access Management→DDNS”, you can configure the DDNS function in the screen

40