TP-Link 4.1.1 1910011002 manual Statistics Table, Current Packets

Page 103

TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide

Figure 4-87 Statistics

¾Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click the Enable button. If disabled, the function of DoS protection in Security settings will disabled.

¾Packets Statistics Interval （5-60）- The default value is 10. Select a value between 5 and 60 seconds in the drop-down list. The Packets Statistic interval indicates the time section of the packets statistic.

¾Sorted Rules – Choose how displayed statistics are sorted.

Select the Auto-refreshcheckbox to refresh automatically.

Click the Refresh button to refresh immediately.

Click Reset All to reset the values of all the entries to zero.

Click Delete All to delete all entries in the table.

Statistics Table:

	IP/MAC Address		The IP and MAC address are displayed with related statistics.

	Total	Packets	The total number of packets received and transmitted by the Router.

		Bytes	The total number of bytes received and transmitted by the Router.
		Bytes

	Current	Packets	The total number of packets received and transmitted in the last Packets
	Current	Packets	Statistic interval seconds.
			Statistic interval seconds.

		Bytes	The total number of bytes received and transmitted in the last Packets
		Bytes	Statistic interval seconds.
			Statistic interval seconds.

			The number of the ICMP packets transmitted to WAN per second at the
		ICMP Tx	specified Packets Statistics interval. It is shown like “current transmitting rate
			/ Max transmitting rate”.

- 93 -

Image 103

Contents TL-WR841N TL-WR841ND Copyright & Trademarks FCC Statement CE Mark Warning Korea Warning Statements Safety Information Yang Hongliang Product Manager of International Business Declaration of ConformityContents 11.1 Backup & Restore Reboot Password System Log Statistics Package Contents Incredible Speed Flexible Access ControlSimple Installation Overview of the RouterConventions Main FeaturesFront Panel Panel LayoutName Status Indication Rear Panel Used as Reset buttonUsed as WPS button Connecting the Router Installation Environment RequirementsSystem Requirements Hardware Installation Wall-mount Install TCP/IP Configuration Quick Installation GuidePlease check the connection following these steps Quick Installation GuideLogin Windows TL-WR841N/TL-WR841ND Quick Setup PPPoE Quick Setup Static IP ISP 12 Quick Setup Wireless Wireless PSK Password You can enter Ascii or Hexadecimal charactersStatus LoginWPS Quick SetupUse the Wi-Fi Protected Setup Button III. Enter the Router’s PIN on your client device II. Enter the client device’s PIN on the Router1 WAN NetworkWAN Dynamic IP WAN Static IP WAN PPPoE PPPoE Advanced Settings TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide NSW / ACT nsw.bigpond.net.au TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide 12 Pptp Settings MAC Clone 13 MAC Address Clone 3 LANWireless Settings Wireless16 Wireless Settings TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide Wireless Security 18 Wireless Security Encryption You can select either Automatic, or Tkip or AES Wireless MAC Filtering To modify or delete an existing entry 22 Wireless MAC FilteringWireless Advanced TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide 25 Wireless Statistics Wireless StatisticsDhcp Dhcp SettingsAddress Reservation Dhcp Client List29 Address Reservation To Reserve an IP addressVirtual Servers Forwarding33 Add or Modify a Virtual Server Entry To set up a virtual server entryTo add a new rule, follow the steps below Port Triggering35 Add or Modify a Port Triggering Entry 3 DMZTo assign a computer or server to be a DMZ server UPnPBasic Security Security39 Basic Security Advanced Security Local Management 41 Local Management Remote Management42 Remote Management Parental ControlTo add a new entry, please follow the steps below 43 Parental Control Settings44 Add or Modify Parental Control Entry Rule 11Access ControlThere are two methods to add a new rule Method One 47 Access Control Rule Management48 Quick Setup Create a Host Entry TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide Method Two 52 Add Internet Access Control Entry Host 53 Host Settings54 Add or Modify a Host Entry Target56 Target Settings 57 Add or Modify an Access Target Entry To add a new schedule, follow the steps below ScheduleAdvanced Routing 60 Advanced Schedule SettingsTo add static routing entries, follow the steps below Static RoutingSystem Routing Table Bandwidth ControlRules List Control SettingsBinding Settings 14 IP & MAC Binding SettingTo add IP & MAC Binding entries, follow the steps below 69 Binding SettingsTo find an existing entry, follow the steps below ARP ListComexe.cn Ddns Dynamic DNSDyndns.org Ddns To set up for DDNS, follow these instructions74 Dyndns.org Ddns Settings System Tools Time SettingsTo set time manually 77 Time settingsTo set time automatically DiagnosticTo set Daylight Saving TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide 79 Diagnostic Results Firmware UpgradeBackup & Restore Factory Defaults82 Backup & Restore Configuration RebootSystem Log Password86 Mail Account Settings Statistics Current Packets Statistics TableTCP Appendix a FAQ Want to use NetMeeting, what do I need to do? Figure A-3 MAC CloneFigure A-5 Add or Modify a Virtual server Entry Want to build a WEB Server on the LAN, what should I do? Figure A-7 Basic SecurityFigure A-9 Virtual Servers Wireless stations cannot connect to the RouterConfigure TCP/IP component Appendix B Configuring the PCShown in the Figure below Figure B-3 ¾ Setting IP address manuallyNow click OK to keep your settings General WirelessEnvironmental and Physical Appendix D Glossary 106