TP-Link 4.1.1 1910011002 manual There are two methods to add a new rule Method One

TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide

Figure 4-47 Access Control Rule Management

¾Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Policy can take effect.

¾Rule Name - Here displays the name of the rule and this name is unique.

¾Host - Here displays the host selected in the corresponding rule.

¾Target - Here displays the target selected in the corresponding rule.

¾Schedule - Here displays the schedule selected in the corresponding rule.

¾Status - This field displays the status of the rule. Enabled means the rule will take effect, Disabled means the rule will not take effect.

¾Modify - Here you can edit or delete an existing rule.

There are two methods to add a new rule.

Method One:

1.Click Setup Wizard button and the next screen will appear as shown in Figure 4-48.

- 63 -