TP-Link 4.1.1 1910011002 manual Dhcp Client List, Address Reservation

Page 57

TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide

time is up, the user will be automatically assigned a new dynamic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.

¾Default Gateway - (Optional.) It is suggested to input the IP address of the LAN port of the Router. The default value is 192.168.0.1.

¾Default Domain - (Optional.) Input the domain name of your network.

¾Primary DNS - (Optional.) Input the DNS IP address provided by your ISP or consult your ISP.

¾Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers.

)Note:

To use the DHCP server function of the Router, you must configure all computers on the LAN as "Obtain an IP Address automatically".

4.7.2 DHCP Client List

Choose menu “DHCP → DHCP Client List”, you can view the information about the clients attached to the Router in the screen as shown in Figure 4-28.

Figure 4-28 DHCP Clients List

¾Client Name - The name of the DHCP client

¾MAC Address - The MAC address of the DHCP client

¾Assigned IP - The IP address that the Router has allocated to the DHCP client

¾Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired, a new dynamic IP address will be automatically assigned to the user.

You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Refresh button.

4.7.3 Address Reservation

Choose menu “DHCP → Address Reservation”, you can view and add a reserved address for clients via the next screen (shown in Figure 4-29).When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to the servers that require permanent IP settings.

- 47 -

Image 57

Contents TL-WR841N TL-WR841ND Copyright & Trademarks FCC Statement CE Mark Warning Korea Warning Statements Safety Information Yang Hongliang Product Manager of International Business Declaration of ConformityContents 11.1 Backup & Restore Reboot Password System Log Statistics Package Contents Simple Installation Flexible Access ControlOverview of the Router Incredible SpeedConventions Main FeaturesPanel Layout Front PanelName Status Indication Rear Panel Used as Reset buttonUsed as WPS button Installation Environment Requirements Connecting the RouterSystem Requirements Hardware Installation Wall-mount Install TCP/IP Configuration Quick Installation GuidePlease check the connection following these steps Quick Installation GuideLogin Windows TL-WR841N/TL-WR841ND Quick Setup PPPoE Quick Setup Static IP ISP 12 Quick Setup Wireless Wireless PSK Password You can enter Ascii or Hexadecimal charactersStatus LoginWPS Quick SetupUse the Wi-Fi Protected Setup Button III. Enter the Router’s PIN on your client device II. Enter the client device’s PIN on the Router1 WAN NetworkWAN Dynamic IP WAN Static IP WAN PPPoE PPPoE Advanced Settings TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide NSW / ACT nsw.bigpond.net.au TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide 12 Pptp Settings MAC Clone 13 MAC Address Clone 3 LANWireless Settings Wireless16 Wireless Settings TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide Wireless Security 18 Wireless Security Encryption You can select either Automatic, or Tkip or AES Wireless MAC Filtering To modify or delete an existing entry 22 Wireless MAC FilteringWireless Advanced TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide 25 Wireless Statistics Wireless StatisticsDhcp Dhcp SettingsAddress Reservation Dhcp Client List29 Address Reservation To Reserve an IP addressVirtual Servers Forwarding33 Add or Modify a Virtual Server Entry To set up a virtual server entryTo add a new rule, follow the steps below Port Triggering35 Add or Modify a Port Triggering Entry 3 DMZTo assign a computer or server to be a DMZ server UPnPBasic Security Security39 Basic Security Advanced Security Local Management 41 Local Management Remote Management42 Remote Management Parental ControlTo add a new entry, please follow the steps below 43 Parental Control Settings44 Add or Modify Parental Control Entry Rule 11Access ControlThere are two methods to add a new rule Method One 47 Access Control Rule Management48 Quick Setup Create a Host Entry TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide Method Two 52 Add Internet Access Control Entry Host 53 Host Settings54 Add or Modify a Host Entry Target56 Target Settings 57 Add or Modify an Access Target Entry To add a new schedule, follow the steps below ScheduleAdvanced Routing 60 Advanced Schedule SettingsTo add static routing entries, follow the steps below Static RoutingSystem Routing Table Bandwidth ControlRules List Control SettingsBinding Settings 14 IP & MAC Binding SettingTo add IP & MAC Binding entries, follow the steps below 69 Binding SettingsTo find an existing entry, follow the steps below ARP ListComexe.cn Ddns Dynamic DNSDyndns.org Ddns To set up for DDNS, follow these instructions74 Dyndns.org Ddns Settings System Tools Time SettingsTo set time manually 77 Time settingsDiagnostic To set time automaticallyTo set Daylight Saving TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide 79 Diagnostic Results Firmware UpgradeBackup & Restore Factory Defaults82 Backup & Restore Configuration RebootSystem Log Password86 Mail Account Settings Statistics Current Packets Statistics TableTCP Appendix a FAQ Want to use NetMeeting, what do I need to do? Figure A-3 MAC CloneFigure A-5 Add or Modify a Virtual server Entry Want to build a WEB Server on the LAN, what should I do? Figure A-7 Basic SecurityFigure A-9 Virtual Servers Wireless stations cannot connect to the RouterConfigure TCP/IP component Appendix B Configuring the PCShown in the Figure below Figure B-3 ¾ Setting IP address manuallyNow click OK to keep your settings Wireless GeneralEnvironmental and Physical Appendix D Glossary 106