ZyXEL Communications 100IH manual North American Isdn Menu Setup Fields

Prestige 100 and 100IH ISDN Router and Router/Hub

		Table 2-7 North American ISDN Menu Setup Fields
Switch	If your switch type is not currently shown, press the space bar to change to the next
Type	switch; repeat until you see the correct switch type. The Prestige will not be able to
	place or to receive calls if the wrong switch type is specified. If you are not sure, contact
	your telephone company to confirm the exact switch type.
B Channel	In general, this will be Switch/Switch (the default). If you are only using one B channel
Usage	(e.g., your Prestige is sharing the ISDN BRI line with another device), then select
	Switch/Unused. If you’re second B channel is a leased line, select Switch/Leased.
	Press the [Space bar] to toggle through all the options. These options are
	♦	Switch/Switch	♦	Leased/Unused	♦ Switch/Unused
	♦	Switch/Leased	♦	Unused/Leased
	♦	Leased/Switch	♦	Leased/Leased
Telephone	Enter the telephone number(s) assigned to your ISDN line by your telephone company.
Number(s)	Some switch types only have one telephone number. For North America, these phone
	numbers should be in a standard seven-digit format (for example, 5551212). Note that
	the Prestige only accepts digits; please do not include ‘-’ and spaces in this field. This
	field should be no longer than 25 digits.
Incoming	This tells the Prestige how to route an incoming analog call. Set to Phone1 if you wish
Analog	to route the incoming analog call for this telephone number to the PHONE port 1 (a.k.a.,
Call.	‘POTS’ port in North America and ‘A/B Adapter’ in Europe). Set to Phone2 if you wish
	to route the incoming analog call for this telephone number to PHONE port 2. Set to
	DOVBS if you wish to receive incoming Data Over Voice Bearer Service call. Note that
	both phone ports will handle incoming analog calls as DOVBS in this case.
SPID	Depending on your switch type, you may have zero, one or two SPIDs assigned to your
Number(s).	line. For example, if your switch type is Northern Telecom Custom, you will have to
	enter two SPID numbers
Advanced	Advanced Setup features are configured when you select Yes to enter 2.1 Advanced
Setup	Setup menu. Refer to the Advanced Phone Services Chapter for detailed information.

Supplementary Voice Services

To take full advantage of the Supplementary Voice Services available though the Prestige’s phone ports, you will need to subscribe to your phone company for them. The Supplementary Voice Services available on the Prestige series include:

♦Call Waiting

♦Three Way Calling (conference)

♦Call Transfer

♦Call Forwarding.

2-14 Hardware Installation and Setup