ZyXEL Communications 100IH manual Internet Access Setup Menu Fields

		Prestige 100 and 100IH ISDN Router and Router/Hub
	Table 3-4 Internet Access Setup Menu Fields
Field		Description
ISP’s Name		Enter the name of your Internet Service Provider, e.g., myISP.
		This information is for identification purposes only.
ISP IP Addr		Enter the IP Address of the remote gateway at the ISP’s site. If
		you don’t have this data, just leave it blank.
Pri Phone and Sec		Both the Primary and the Secondary Phone number refer to the
Phone Number		number that the Prestige dials to connect to the ISP.
My Login Name		Enter the login name given to you by your ISP.
My Password		Enter the password associated with the login name above.
Single User Account		Please see the following section for a more detailed discussion
		on the Single User Account feature. The default is Yes.
Telco	Transfer	This field specifies the type of connection between the Prestige
options :	Type	and this remote node. Select 64K, or Leased.
Multilink		The Prestige uses the PPP Multilink Protocol (PPP/MP) to
		bundle multiple links in a single connection to boost the effective
		throughput between two nodes. This option is only available if
		the transfer type is 64K. See menu 11.2 for more details.
Idle Timeout		This value specifies the number of idle seconds that elapses
		before the remote node is automatically disconnected. Idle
		seconds is the period of time when no data is transmitted from
		your Prestige. Administrative packets such as RIP are not
		counted as data. The default is 100 seconds. This option only
		applies when the Prestige initiates the call.

At this point, the SMT will ask if you wish to test the Internet connection. If you select Yes, your Prestige will call the ISP to test the Internet connection. If the test fails, note the error message that you receive on the screen and take the appropriate troubleshooting steps.

Internet Access 3-9