ZyXEL Communications 100IH manual Enable, Yes then

Prestige 100 and 100IH ISDN Router and Router/Hub

Incoming:	Callback	This field is applicable only if Call Direction is Both.		Enable
		Otherwise, a N/A appears in the field.		Disable
		This field determines whether or not your Prestige will call
		back after receiving a call from this remote node.
		If this option is enabled, your Prestige will disconnect the
		initial call from this node and call it back at the Outgoing
		Primary Phone Number (see below).
Outgoing:	My Login	This is a required field [?] if Call Direction is either Both
	Name	or Outgoing. Enter the login name for your Prestige when
		it calls this remote node.
Outgoing:	My	This is a required field [?] if Call Direction is either Both
	Password	or Outgoing. Enter the password for your Prestige when
		it calls this remote node.
Outgoing:	Authen	This field sets the authentication protocol used for
		outgoing calls.
		Options for this field are:
		• CHAP/PAP - Your Prestige will accept either CHAP		CHAP/PAP
			or PAP when requested by this remote node.
		•	CHAP - accept CHAP only.	CHAP
			PAP - accept PAP only.
		•		PAP
Outgoing:	Pri(mary)	Your Prestige always calls this remote node using the
	Sec(ondar	Primary Phone number first for a dial-up line.
	y) Phone	If the Primary Phone number is busy or does not answer,
	Numbers
		your Prestige will dial the Secondary Phone number if
		available.
		Some areas require dialing the pound sign # before the
		phone number for local calls. A # symbol may be included
		at the beginning of the phone numbers as required.
Edit PPP Options		To edit the PPP options for this remote node, move the		Press space
		cursor to this field, use the space bar to select Yes and		bar to toggle
		press [Enter]. This will bring you to Menu 11.2 - Remote		Yes then
		Node PPP Options. For more information on configuring		press [Enter]
		PPP options, see the section Editing PPP Options.
Rem IP Addr		This is a required field [?] if Route is set to IP. Enter the
		IP address of the remote gateway.

4-4 Remote Node Configuration