Prestige 100 and 100IH ISDN Router and Router/Hub
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
Table 3-2 TCP/IP Ethernet Setup Menu Fields
Field | Description | Example |
|
|
|
TCP/IP Setup |
|
|
IP | Enter the IP address of your Prestige in dotted decimal notation |
|
192.168.1.1 | ||
Address |
| (default) |
IP Subnet Mask | Your Prestige will automatically calculate the subnet mask based | 255.255.255.0 |
| on the IP address that you assign. Unless you are implementing |
|
| subnetting, use the subnet mask computed by the Prestige |
|
|
|
|
RIP Direction
Version
Press the space bar to select the RIP direction from Both/In
Only/Out Only.
Press the space bar to select the RIP version from
2B/RIP-2M.
Both
(default)
RIP-1
(default)
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.
Internet Access |