Input Screen
Setting | Function |
|
|
Default
|
| Select | Select the group: Video Group, Scaler | Scaler |
|
| VGA Group | Select the VGA input: From 1 to 4 | VGA 1 |
|
|
| In the Video Group operation mode |
|
|
| HDMI Group | Select the HDMI input: From 1 to 4 | HDMI 1 |
|
| Comp Group | Select the Comp input: From 1 to 4 | Comp 1 |
|
| YC Group | Select the YC input: From 1 to 4 | YC 1 |
|
| CV Group | Select the CV input: From 1 to 4 | CV 1 |
|
| Scaler | Select the source to scale (in the Scaler operation mode): From | VGA 1 |
|
|
| VGA 1 to VGA 4; from HDMI 1 to HDMI 4; from COMP 1 to COMP |
|
|
|
| 4; from YC 1 to YC 4; from CV 1 to CV 4, and USB |
|
|
| Image Name | Shows the file name that is displayed when the USB port is connected |
|
|
|
| Supports JPEG format only. The JPEG file should not exceed a |
|
|
|
| resolution of 2048x1536. If the image file is not within the definition a |
|
|
|
| blank screen appears and the machine displays the message: "File too |
|
|
|
| big" or "File too small" (smaller than 320x240) |
|
|
| Color Format | Select the color format: Auto, RGB or YUV | Auto |
|
| Video | Select the video standard: Auto, NTSC, PAL, |
|
|
| Standard | 4.43, SECAM or |
|
|
| Set the horizontal position (For UXGA and component video inputs): | Auto | |
|
|
| The range changes according to the input mode |
|
|
| Set the vertical position: The range changes according to the input |
| |
|
|
| mode |
|
|
| Frequency | Adjust the frequency (for the UXGA inputs): The range changes |
|
|
|
| according to the input mode |
|
|
| Phase | Adjust the phase: 0 to 31 | 0 |
|
| Auto image | Assesses the image and improves the quality accordingly, by |
|
|
|
| automatically adjusting the phase, frequency and position. Upon |
|
|
|
| completion, the relevant OSD values are updated (Hpos, Vpos, |
|
|
|
| Phase and Frequency) |
|
|
|
|
|
|
30 |
|
| ||
|
|
|
|
|