Kramer Electronics VP-725NA user manual Setup Screen Setting Function Default

7.1.5The Setup Screen

Figure 21 defines the Setup screen.

Figure 21: Setup Screen

Setup Screen

Setting Function

Default

	Save	Save a profile: From Profile 1 to Profile 8
	Recall	Recall a profile: From Profile 1 to Profile 8
	Slideshow	Set speed for slide show (see Section 7.1.6): Min, Low, Mid, Long,	Off
		Max, Off
	Frame Lock	Locks the vertical refresh rate of the output to that of the input:	Off
		On/Off
		Note that seamless switching is not possible when working in the Frame
		Lock mode unless all sources are frame synchronized.
		In cases where the output resolution can support the vertical refresh rate
		of the input, the output refresh rate changes according to the input
		refresh rate
	Auto Image	Automatically adjust and align the picture each time one of the	Manual
		UXGA inputs is selected or if the UXGA input resolution has
		changed: Manual, Auto
	Switching	Select seamless switching (fade-through-Black) or fast switching	Seamle
	Mode	which is faster but may cause glitches on the output (applies only	ss
		when switching between analog inputs): Seamless, Fast
	Factory Reset	Reset your VP-725NAto its preset default settings: Confirm, Yes,
		No
	Advanced	Open the advanced setups (see Figure 22): Mode Set, OSD, Misc.,
	Setup	Input, Output (see Section 7.1.7)
	EDID	EDID writing protection: On/Off
	EEPROM	When an EDID file update is required, set the EDID protection to OFF
	Protect
VP-725NA - Configuring and Controlling the VP-725NA				39