Kramer Electronics VP-725NA user manual Input Setup Screen Setting Function Range Default

Misc Setup Screen

Setting

Function

Default

HDCP	Define whether the HDCP follows the input or the output: Follow	Follow
Setting	Input, Follow Output	output
	When Follow Input is selected, the Scaler changes its HDCP output
	setting (for the HDMI output) according to the HDCP of the input. This
	option is recommended when the HDMI Scaler output is connected to
	a splitter/switcher (in this mode, switching may not be glitch-free)
	When Follow Output is selected, the Scaler matches its HDCP output
	to the HDCP setting of the HDMI acceptor to which it is connected.
	This ensures smooth switching, regardless of the input
Overscan	Allows stretching of the outputted picture: On, Off	Off
	Enabled only for HD input resolutions

Figure 24: Input Setup Screen

Input Setup Screen

Setting

Function

Range

Default

	HT	Horizontal Total	1344
	HW	Horizontal sync pulse width	136
	HS	Horizontal active start point	296
	HA	Horizontal active region	1024
	HP	Horizontal polarity
	VT	Vertical Total	806
	VW	Vertical sync pulse width	6
	VS	Vertical active start point	35
	VA	Vertical active region	768
	VP	Vertical polarity
	OCLK	Output clock	65
	Enable		off
	Apply	Press to apply settings	N/A
VP-725NA - Configuring and Controlling the VP-725NA				43