Operating Your VP-23RC
Each pressed button illuminates1, indicating selection and outputting of that video and audio source.
If a button includes a macro sequence, it will be executed when pressing that button.
CV Video Sources 
CV Video Acceptor
UXGA Acceptor
UXGA Sources | Speakers |
|
Figure 20: Separate Switcher Mode
9.4.2The Master Audio Mode
In the master audio mode, you can route an audio input signal from any of the A/V switchers or from the microphone, to the MASTER OUT and/or SPKR OUT outputs.
Figure 21 shows a plasma-display connected to the VP-23RC unit via the UXGA OUT HD15F connector, and a pair of speakers connected to the SPKR OUT terminal block connector (the Media/Room Controller connections are not shown in this illustration).
If a button includes a macro sequence, it will be executed when pressing that button.
1 Pressing an illuminated button for more than 2 seconds will disconnect the output and the button will no longer illuminate
35