Kramer Electronics VP-770 user manual Input Menu, Setting Function

6.2The Input Menu

Figure 8: Input Menu

Setting Function

Display Mode

Select the display mode (see Figure 9):

Single Window – single window mode operation with one channel displayed E

Picture in Picture (PiP) – dual window mode operation, a smaller window superimposed over a full screen image (see Section 7.2) E

Picture + Picture (PoP) – dual window mode operation, both images appear side-by-side and the aspect ratios of both images are maintained (see Section 7.2) E

Split (SbS) – dual window mode operation, both images are placed side-by- side with the same height (see Section 7.2) E

When selecting the dual window mode, set the Main window or the PiP window parameters via Misc -> OSD -> Window Control (see Section 6.8)

Note that while browsing the OSD menu in the dual window mode, pressing the PIP button will instantly toggle the window control (between Main and PiP)

Customized –customized image size E

i	Note that any change in the output resolution may cause
	disproportion or even cancel the window customization.

Input Source

Select the input source: HDMI1, HDMI2, PC1, PC2, COMP, CV1, CV2 or DP M/P

i	Note that SDI is not applicable to the VP-770and appears
	transparent in the OSD. The commands related to SDI in the
	OSD menu are therefore grayed out.

If the transparency of the OSD menu is set to ON this menu item will become invisible (see Section 6.8)

i	Note that any change in the input source may cancel the freeze
	and blank settings.

20 VP-770 - The OSD Menu