Kramer Electronics Controlling via the OSD Menu, Controlling via the VP-770 Web Pages

8.2Controlling via the OSD Menu

You can change PiP Window parameters, main window parameters and entire system parameters via the OSD menu, as described in Section 6.8.

8.3Controlling via the VP-770 Web Pages

You can remotely operate the VP-770using a Web browser via the Ethernet connection (see Section 8.5). To be able to do so, you must use a supported Web browser:

For Windows 7:

∙ Chrome version 25 ∙ Internet Explorer version 9

∙Firefox version 15

For Mac:

∙ Chrome version 25 ∙ Safari 6

∙Firefox version 20

8.3.1Connecting to the VP-770 via your Browser

i

Note that if the Protocol is set to Legacy (via the Miscellaneous menu, see Section 6.8), the Web pages may not function properly.

Make sure that your PC is connected via a network to the VP-770and do the following:

1.Open your Internet browser.

2.Enter the unit’s IP number or name in the Address bar of your browser.

If you are using DHCP, you have to enter the name.

The default IP number is 192.168.1.39, and may be changed by the system integrator

Figure 27: Entering the IP Number in the Address Bar

VP-770 - Controlling the VP-770 47