8 Controlling the VP-770
The
∙The front panel buttons (see Section 8.1)
∙The OSD menu (see Section 8.2)
∙The Web pages (see Section 8.3)
∙Remote control contact closure (see Section 8.6)
∙The infrared remote control transmitter (see Section 8.7)
8.1Controlling via the Front Panel Buttons
The
∙Input selector buttons for selecting the required input: HDMI (1 and 2), PC (1 and 2), COMP, CV (1 and 2) and DP (see Section 8.1.1)
∙PIP, BLANK and FREEZE buttons (note, these buttons illuminate when selected)
∙MENU (left arrow), ENTER (right arrow), and up, down, arrow buttons
∙Output volume up and down buttons (when not in the OSD mode)
∙RESET TO XGA/720p and PANEL LOCK buttons
8.1.1Using the INPUT Front Panel buttons
When selected, an INPUT front panel button behaves as follows:
| Selecting the: |
|
| Causes the button to: |
|
|
|
|
| ||
|
|
|
|
|
|
Main input button |
| Illuminate continuously |
| ||
PiP input button |
| Blink (the light On period is shorter than the light Off period) |
| ||
|
|
|
| ||
Same Main input button and |
| Blink (the light On period is longer than the light Off period) |
| ||
PiP button |
|
|
|
| |
|
|
|
|
|
|
i
If you want to adjust the image of a selected input in a window, press that input button again (up to 3 times) for fast tuning. Pressing that input button for the fourth time initiates full tuning of the window.
46 | |
|
|