IOGear GCS1802, GCS1804 user manual

Page 11

No.

1

2

3

4

5

Component

Firmware Upgrade

USB Peripheral Port

Power Jack

Console Port Area

CPU Port Areas

Description

The connection for the ﬁrmware upgrade cable.

One of the two USB 2.0 peripheral ports (backwards compatible with USB 1.1)

Connection for the power adapter

Connections for your mouse, keyboard, monitor, and audio devices. Each connection has an appropriate icon for identiﬁcation

Connections for the KVM cables between your computers and the switch. Each KVM port is comprised of a microphone, speaker, and a special DB15 (yellow) connector for monitor, keyboard, and mouse.

Note: The speical DB15 connectors have been designed to work with this switch (see the Cables section of this manual). Do NOT attempt to use ordinary 15-pin VGA connector cables to link these ports to the computers.

11

Image 11

Contents Installation Guide Page Table of Contents Package Contents Computers RequirementsConsole Cables Connector Cable LengthMAC Supported Operating SystemsGCS1804 Front View HardwarePage GCS1802 Rear View GCS1804 Rear View Page Cable Connection Hardware SetupPage Installation Diagram PS/2 Port Numbering Before you beginPage Manual Operation Pushbutton operation Default methodHotkey Operation Page Port Switching Result Hotkey sequence Auto Scanning Skip ModeTo exit Skip, press Esc or Spacebar OSD Overview OSD OperationKVM USB Moves the highlight bar up Moves the highlight bar down OSD Navigation F1 KVM OSD FunctionsF3 Audio F6 SET Page Page Page Screen Blanker Default and Alternate manual switch settings Setting Default settings for the On Screen DisplayKeyboard Emulation Sun Keyboard Firmware Upgrade Utility Page Page Starting the Upgrade Page Upgrade Failed Page Troubleshooting Symptom Technical Support Make sure you Limited Warranty StatementWarranty Information Important Product Information Federal Communications Commission FCC Statement Page CE Statement IOGEAR, INC ContactFUN