IOGear GCS1802, GCS1804 user manual Requirements, Console, Computers

Page 5

Requirements

Console

-VGA, SVGA, Multisync monitor or LCD display

-USB or PS/2 Mouse

-USB or PS/2 Keyboard

Note: Due to the keyboard emulation used by the KVM for switching, programmable keys on some keyboards may not function

Computers

-A VGA, SVGA, DVI or Multisync card

-A free USB Type A port or PS/2 mouse and keyboard connections

Note: PS/2 cables must be purchased separately.

USB sharing will not function with PS/2 KVM cables

5

Image 5

Contents Installation Guide Page Table of Contents Package Contents Computers RequirementsConsole Cables Connector Cable LengthMAC Supported Operating SystemsGCS1804 Front View HardwarePage GCS1802 Rear View GCS1804 Rear View Page Cable Connection Hardware SetupPage Installation Diagram PS/2 Port Numbering Before you beginPage Manual Operation Pushbutton operation Default methodHotkey Operation Page Port Switching Result Hotkey sequence Auto Scanning Skip ModeTo exit Skip, press Esc or Spacebar OSD Overview OSD OperationKVM USB Moves the highlight bar up Moves the highlight bar down OSD Navigation F1 KVM OSD FunctionsF3 Audio F6 SET Page Page Page Screen Blanker Default and Alternate manual switch settings Setting Default settings for the On Screen DisplayKeyboard Emulation Sun Keyboard Firmware Upgrade Utility Page Page Starting the Upgrade Page Upgrade Failed Page Troubleshooting Symptom Technical Support Make sure you Limited Warranty StatementWarranty Information Important Product Information Federal Communications Commission FCC Statement Page CE Statement IOGEAR, INC ContactFUN