IOGear GCS1802, GCS1804 user manual Firmware Upgrade Utility

Page 41

The Firmware Upgrade Utility

The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides an automated process for upgrading the KVM switch’s ﬁrmware. New ﬁrmware upgrade packages are posted on our web site as they become available. Check the web site regularly to ﬁnd the latest packages: http://www.iogear.com

To prepare for the ﬁrmware upgrade, do the following:

1.From a computer that is not part of the KVM installation go to our Internet support site and choose the model name of your device (GCS1802) to get a list of available Firmware Upgrade Packages. Note. The GCS1802 and GCS1804 share the same ﬁrmware.

2.Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.

41

Image 41

Contents Installation Guide Page Table of Contents Package Contents Computers RequirementsConsole Cables Connector Cable LengthMAC Supported Operating SystemsGCS1804 Front View HardwarePage GCS1802 Rear View GCS1804 Rear View Page Cable Connection Hardware SetupPage Installation Diagram PS/2 Port Numbering Before you beginPage Manual Operation Pushbutton operation Default methodHotkey Operation Page Port Switching Result Hotkey sequence Auto Scanning Skip ModeTo exit Skip, press Esc or Spacebar OSD Overview OSD OperationKVM USB Moves the highlight bar up Moves the highlight bar down OSD Navigation F1 KVM OSD FunctionsF3 Audio F6 SET Page Page Page Screen Blanker Default and Alternate manual switch settings Setting Default settings for the On Screen DisplayKeyboard Emulation Sun Keyboard Firmware Upgrade Utility Page Page Starting the Upgrade Page Upgrade Failed Page Troubleshooting Symptom Technical Support Make sure you Limited Warranty StatementWarranty Information Important Product Information Federal Communications Commission FCC Statement Page CE Statement IOGEAR, INC ContactFUN