Note: Where entries are required, a Dialog box opens at the bottom of the On Screen Display asking for an entry i.e. yes / no, or numbers to set an interval time.
Note: Programmable mouse buttons will pass through USB cables, but not PS/2 cables
Screen Blanker
1.Set Time Out interval
2.Set the Screen lock to ON (Y, in the dialog box)
3.Select Password, if no password has been set, [Enter] will allow you to set a password. If a password has been set type it in first then [Enter]
4.Type in the (new) password then confirm by reentering it.
5.When the password is accepted “Password OK” appears on the display.
36