Hotkey Port Control
Note: While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are suspended - only Auto Scan Mode compliant keystrokes and mouse clicks can be input. You must exit Auto Scan Mode in order to regain normal control of the console.
While you are in Auto Scan Mode, you can pause the scanning in order to keep the focus on a particular computer by pressing P. During the time that Auto Scanning is paused, the Command Line displays: Auto Scan: Paused. Pausing when you want to keep the focus on a particular computer is more convenient than Exiting Auto Scan Mode because when you Resume scanning, you start from where you left off. If, on the other hand, you Exited and restarted, Scanning would start over from the very first computer on the installation. After pausing, to resume Auto Scanning, press any key. Scanning continues from where it left off.
Alternate Hotkey Invocation Keys:
An alternate set of Hotkey Invocation keys is provided in case the default set conflicts with programs running on the computers.
To switch to the alternate Hotkey Invocation set, do the following:
1.Invoke HKM (see p. 19)
2.Press and release the H key. The Hotkey Invocation keys become the Ctrl key (instead of Num Lock) and the F12 key (instead of Minus).
Note: This procedure is a toggle between the two methods. To revert back to the original [Num Lock] [Minus] method, invoke HKM, then press and release the H key again.
21